Search results

Y I did wonder about cumulative leakage - I've added lots of additional small electronic devices but then realised they are all double insulated so no earth to leak to. However they all use Switch Mode PSUs these days so could the initial switch on of them all at the same time cause a transient...

Sorry yes missed the 's' , once the RCD trips either randomly or if we have a power cut then I have to turn all the MCBs off before the RCD will reset. The RCD will randomly trip even if we are away and not because of a power cut.

Hi, I have a intermittent RCD trip - like weeks between times. Once it trips I can't reset without turning off the MCB then reset it then turn them back on. It never trips again as I switch them on so the 'fault' appears to have immediately resolved. I also have the issue that if we have an...

Thanks for the input, turns out it was my understanding at fault. If and AREA is in entry or alarm state then the keypad or fob only disables that AREA. Then need to enter or fob again to disarm all AREAs. Secureiam - I don't understand your comment "John is local disarm yet the keypad is...

Hi, I printed the settings to this file. I originally had Area Arm Suite 1 set to areas A and B. Using user John arming using the keypad and code or the Fob armed both areas the same. However the disarming with the code disarmed both A and B, but if I used the Fob then only A disarmed. Having...

Is the same user - I think it is the arm suite. When I remove that it seems to work ok

Hi, I have setup my Texecom Elite 48W with 2 areas. If I disarm by entering the my keycode on the keypad all areas disarm, but the Proximity fob and Texecom app only disarm Area A, area B remains armed. Any ideas how I can set it to disarm all Areas? Thx John

Hi, I have just installed a Kinetico 2020c HF and noticed in was eating salt blocks at a rate of 1 a day and the overflow was running. I found that water was leaking from the joint around the control valve housing just above the water line - the part held together by the 8 larger bolts. I...