Search results

I was thinking that but time for an upgrade and one that doesnt cost me every year Cheers for your help.

Servicing has just gone up to 140 so I’m thinking of getting a Ring gen3 that i can maintain and change batteries on etc.

So this is the order of actions: 1. Put alarm in service mode (not sure how to do this but hopefully someone can point me in the direction) 2. Turn control panel off 3. Remove bell box batteries (though I’m guessing the anti tamper will kick in after I have removed cover and won’t stop until I...

Hi there Ive seen a few posts here but seem to provide enough detail to help me. I’m keen to to replace our current Risco Agility 3 system and want to know how i go about powering down the system without any of the alarms being triggered. I have the engineers code if that helps. I’m hoping...

Many thanks for your help securiam

Many thanks for your tip...just a couple of questions Are you saying to just let the tamper alarm go off when you replace the batteries on the sounder and disarm as usual? I'm not sure what taking the pirs through a walk test would do? Can you elaborate? As my alarm is running in sure the...

I need to replace the batteries in both my external sounder and PIR sensors and as I reckon I know the batteries (CR123s??) I am keen to try to replace myself but need some help in disabling the tamper settings I am sure are enabled. Can someone guide me through the steps? Cheers Ian

Charnwood, the NRVs were replaced because we were losing hot water in the bathroom taps and shower and was advised by a plumber that this was because cold water was mixing with the hot water in the shower mixer. Once the NRVs were replaced this stopped but the 'chattering' noise started!

Thanks Alec1, I only changed the existing crosswater NRVs and thermo cartridge with new from crosswater so not cant see how this may have changed the water pressure. I have just dine some checks and the noise only occurs when the hot water is mixed and is not as prominent when turning the...

I wondered if anyone can help, recently I had fitted new crosswater NRVs and thermostatic cartridge on my flush mounted Crosswater shower/bath control (3 knob type) and since fitting when running the shower there is a loud chattering noise audible from the wall in the adjacent room. I am pretty...