Search results

Hi, thanks for the reply but as you can see from the pictures I have a waste from the basin and bath joining inline so a bend won't help or work

Hello! I'm in the process of installing my bathroom and i'm wondering how is best to connect into the soil pipe. A tee pointing upwards will mean the flexi pan pipe i'm going to use likely would not have fall on it. Is there a different type of tee piece i could buy that doesn't stick out so...

So like this? http://www.aerohydraulics.com/p-gm-142166-1354796.aspx?&utm_source=GoogleMerchant&utm_medium=PriceComparison&utm_campaign=Froogle20161&gclid=COXpjrL9pMoCFYU_GwodxEIAtA Is a flexi tap connector definitely 3/4 ?, just the picture looks small :D

W/M hose has female connectors..

So 3/4 inch same as a tap connector as well? So what size nipple would i need for a 3/4 female?

No joy there, its just trickling, and it has its own feed from the tank.

I don't have any taps ;)

Hi, I'm trying to clear an air lock in our cold water feed to bath that I believe got there when i drained everything down to replace isolation valves. I want to connect a flexi tap connector to the 22mm cold feed, and then connect the hose to this. I have an outside tap connector so would...

Thanks. You say the valves should open and close, is there a way to tell this other than rads getting hot? ie on the valves themselves or something?

So linking out in the back of the programmer will cause the boiler to fire up indefinitely while its switched on right? I'll give this a go in the morning then

Hi, there are two of these in the airing cupboard, one on a pipe coming from half way up the cylinder and one on a pipe just below the central heating pump (I think). They are connected to different blocks in the junction box

Hi, I've recently moved into a new property and i have an issue with the central heating/hot water in that i cannot get the programmer to switch both on at the same time! The boiler is a British Gas 330+, the programmer is (based on a warranty sticker) 1997 Danfoss. When for example the...

It really is fine, no idea what to do

Yea its the bit that goes into the rad so there is not olive or whatever. I put a good amount of tape on it, like i said the thread on the old partseems different so not sure if thats why?

Hi all, I have recently removed my 2 downstairs radiators because i eas having the room plastered. While i was at it i thought i would replace the radiator valves. All is ok, i read alot and managed to get all valves on ok with no leaks for 3 weeks now. The problem is not i am putting the...