Search results

Sadly, they are different.... its very unusual that so many places sell them yet no on has apparently made a vid of swapping them out!

Hi Guys I need to replace the fridge door hinges on our KI30M02GB Siemens fridge freezer. I want to ensure I know exactly what I need to do, as if I need to actually remove the appliance from the kitchen unit, then clearly I need to empty the damn thing to move it. Loads of places selling the...

Hi - agreed - 3/4" bsp is not 3/4".... A standard washing machine hose (3/4" bsp) fits the water meter perfectly... so its 3/4" bsp...

Hi Rob - and thanks for the reply. Not using it for gas, so all good! (water). The fittings were "sold" as gas meter fittings, and stated 3/4" to 22mm (end fed solder) but they are considerably larger than the make 3/4" bsp water meter I want to mate them to. The fittings measure (female) at...

Hi Guys I bought some Gas Meter Union - 3/4" x 22mm - expecting that the 3/4" threaded end would connect to the 3/4" BSP of a water meter... but it does not. Anyone got a clue what went wrong??!?! - when is 3/4" BSP not 3/4" BSP!??!!? Thanks - appreciate your help!

Hi - thanks for the reply. Given that the old valves are what looks like 1/2" bsp but have a 8mm to that thread adapter, I was hoping could find something to reuse the existing incomming pipe and not have to remove the 8mm end... as I fear I would end up with a yorkie straight and a new bit of...

Hi Guys My house was built just in the late 90's and has Tower thermostatic valves installed. Problems with the spindle leaking and in *most* cases the packing nut won't budge meaning its swap the valve time for a few now they have started to leak. Is the same valve still available? I have...

Hi Guys Our tumble is quite a few years old, and has been looked after - both in terms of replacement parts (pump, 3 bearings and a spider) and cleaning. However! - it has started to leak - it appears to be the left hand side of the machine. I replaced the pump two years ago when the machine...

Hi I wrote some scripts to integrate Texecom into Homeseer some years ago, and been running them since. You can easily get real time (pretty much) response on zone updates easily.. ideal for lighting etc, as well as heaps of panel status info if you care to poll for it. You could use...

You can pull pretty much everything into Homeseer. I use the PIRs for occupancy detection too - using BLMotion. I also use the panel (setup as a different area) as a general purpose input device, so things like fridge/freezer doors, water meters, gas meters etc all are on a zone that HS...

Hi I wrote a couple of scripts to integrate my Premier with Homeseer. What automation are you using? The Premier range support a couple of protocol options and are excellent for integration... you can have all set staus, battery, mains, log, zones etc etc David