Search results

no it works, just the adjuster screw came to what seemed to be a stop but when i turned it a bit more it was just a sticking point.

horray it works but the timer seems to not alter

ah so just a small block connector? Thanks, read this but dismissed it. more fool me

its a 2 way which i think is why it now trips when connected the way the old one was. this one is labelled L1(where the N wires are) L2(where at the top of pic and Common on the right of pic. checked iso wiring and fan, all correct as in instructions

ive not reconnected the 3 and E from the iso in this pic, but im wondering if the new pull switch is layed out differently.

i didnt wire it until now so i would have daylight should this happen. AARRGGHH. Ive put a new pull switch on as the old ones N terminal had no grub screw, will put up a photo.

tried this today but just trips rcd, any ideas?

thank you for all your help, much appreciated. Dom

Ah yes I was on the right track, happy to see I wasnt about to get it wrong. Lastly am I ok to cut and connect this neutral loop into the redundant N terminal in the pull switch?

well Ive got everything up until the pull switch connected just not sure what to do there. I have a common, live and earth terminal being used and a redundant N terminal. Do I put my black sleeved brown to the live brown to common and grey sleeved blue to neutral? as the fan is double...

sorry still dont understand the connections at the pull switch end

thats good i have bought that very isolator. where my neutral is not connected in my pull switch (just looping through) should i cut and bare it to join all 3 N into the switch N terminal. thanks by the way, Dom

so from my isolator what connections do i make to the pull switch, can i cut the neutral looping into the pull switch and put both ends into the neutral terminal

yes rjm2k thats exactly it, timered extractor is what i need to fit

will try and get a photo up soon, but it is likely that it is the last light where it is. to explain it better though there is a live into the common and a live into the live terminal but the N terminal is empty just a N wire running into the switch casing and back out (looped) not bared off...

so why is the neutral not connected into the switch? its just continuous

so junction box is where i connect my permanent live etc?

ok so there is one cable coming into the pull switch which has had the outer sheathing removed to enable the earth and live to be cut and terminated at the switch but the neutral is left continuous?