Search results

For future reference most magic wands dont work on low voltage and never rely on it being accurate. Use a multimeter or similar

Didn't notice the date, better late than never :D

Judging by the size difference in the cables in the r/h fuse I'd say the small one shouldn't be in there full stop, and there appears to be no earth to the metal casing of your intercom, or others for that matter, get a professional in

Best for fixing in thermalise would be brown plug 6mm hole, drill through plasterboard and into block work, bang plug through plasterboard with screw inserted to get it all the way through, when fixing pole do not over tighten screw or it will pull the pboard back towards the block behind...

My mate uses a long thin screwdriver through the grill to push the catch in behind, quite common problem apparently

Any of the showers leaking/dripping

Aluminium lamps that project the heat down rather than into the roof would solve the heat issue at a fraction of the cost of led's. think sylvania make them, have had several experiences where cables inside spotlight have melted due to insulation and fixed it by changing lamp holders and putting...

The pipes won't heat up as there will be no flow through them, ie nowhere for the hot water to go, one is flow the other is return, connect the 2 together and fire up the heating and then they will get hot

Ply isn't going to look all that special painted, I'd think of a plan b like laminate

Could you not turn the connector on there and go into a 135deg bend to get the pipe tight back to the wall? Get a enclosed cistern with back to wall pan, then all you need is a 90deg and pan connector in behind, you will have more room for pipe work if you get an enclosed cistern (one in a...

Would of thought it is the pump playing up