Search results

Do they look ok when laid?

As anyone used easy roof systems?? Got a job to do and client doesn't like tiles!!even thou I've battened up for tiles already Pitch on roof is 15decree , they want Spanish slate on now Some rep from travis Perkins as told them about this stuff but I'm not too sure??

Procter roof shield is all I use unless client buys different!! Might be dearer but never had a problem with it

Back windows might be ok as for the one on the slope you could remove the timber spar off the wall then put a smaller one in and form a box valley, secret gutter against the wall giving you more upstand for your lead flashing.other wise it's a big job altering all the roof!! And would you get...

What's on the roof now? Can you not reuse them?

Eave protector will be your best bet,you should be able to slip them under the tile and felt

The bottom tiles should have full length channel on!! They must have ran out of them!!!!! I've do a site with them years ago and there was 3 different tiles for every house, bottom eve tile,middle tile which is that one in your picture then a top course tile, nightmare!!

I'm sure if you asked the roofer to do them after the builder had finished he would of(I would have) just to make sure it was right and looked good, spoilt a good job by the looks of things.

Have a look online pal there are plenty of options and you can get it cut to the size you need so no waste. Have a look on you tube at how to fit epdm,

Cant believe it as not leaked in from day one!!! Terrible workmanship,, at least with epdm you won't have to form steps in the box valley and you could have a go at it your self

Shocking that!! Is there lead under the grp valleys?? And maybe they put them in as a repair?? If they have is shocking cheapest option is strip out afew courses of tiles off either side and replace it with epdm firestone rubber,you would most prob need to place timber in box valley.then re...

It's impossible to fit that vapour barrier on a re roof it's all well and good on a new build or extension So put nothing in at all then?? Building control will love that,you are making it more complicated than it is?? Upgrading insulation is all you can do or put nothing in. Been roofing...

Whats VCL? Your loft room will have cupboards at the Eve's or access into roof void ? If so only need to insulate up from there the other bit will be with rock wool or similar? I did a terrace house and the 40mm boards came in about £200 think roof area was 25m2 per side, the breathable felt...

👍 All u can do is upgrade something is better than nothing, even building control officer will say this as for cost afew 8x4 insulation sheets plus afew hours to install,it's not a big job to do when roof is off,roofers who are doing job will tackle it

Ask about locally for a decent roofer? Or knock on afew doors around the area that have had roofs redone? Or at the local builders merchants😉

That's cheap breathable felt, I have never used it before, but why use cheap materials on your roof, which is one of the most important parts of your building?😉ring velux up and give them the code off old window, I'm sure they will help you

Project manager for a terrace re roof??not sure about that , building control will check insulation and velux windows,is there a room in the loft?? Tlx gold is insulation and felt in one so they will strip off replace any rotten timbers etc make good veluxs then lay the tlx gold and batten up...

A site down road from me have just had repairs done to valleys and verges due to cement falling out and they were built just under 10 years ago,so the 10 year warranty is good so Deffo ring them up and claim, you shouldn't have to claim on your house insurance :wink:

Have you plaster boarded over the rafters yet? If not you could open the flaps on the felt using some small pieces of overflow pipe, then install vented dry ridge system

Could be just hot air getting into loft space,so get the insulation upgraded,make sure loft hatch as king span on back of it, another thing you can do is take off dry ridge system and cut felt all along ridge to make a 10-20 mm gap then put dry ridge back on😉that should inprove the...