Search results

  1. R

    How to prepare this wall for painting?

    I decided I wouldn't be able to deal with any visible lines after painting so instead brushed all the paint with sugar soap, left it for a while then took it off using a scraper, did some very light damage to the plaster in small areas while scraping but will fix that with surface filler...
  2. R

    How to prepare this wall for painting?

    It's not very raised, looks like a single layer of paint to me, less than 1mm thick - dunno how visible it is but there's an angled pic below. https://imgur.com/a/UIITxyM Reckon the base coat will work in this case? Cheers.
  3. R

    How to prepare this wall for painting?

    Hi all, I recently stripped the wallpaper in a room and all of my walls were left as in the image below, with a mixture of bare plaster and old paint. https://imgur.com/a/gABOUYj I want to paint these walls and was wondering how I should best approach preparing them for painting? Ideally I'd...
  4. R

    Maximum Air Pressure Biasi Garda HE (M96.28SM)

    No, it's not been topped up in several weeks, holding at 1.1bar cold.
  5. R

    Maximum Air Pressure Biasi Garda HE (M96.28SM)

    Thanks for coming back to me so quickly. Is there any danger in me using it until I can get someone out to service it? Cheers.
  6. R

    Maximum Air Pressure Biasi Garda HE (M96.28SM)

    Hi, Can anyone advise what the maximum pressure while in operation is for this boiler, please? When not in operation my boiler is resting at around 1.1bar, but when I turn it on, depending on the desired temperature this can creep up to 3+, which seems high to me but I can't find anything in...
  7. R

    Biasi Garda HE Silver M96.28SM/D - Lack of burner ignition

    Hi all, The past couple of weeks I've been experiencing an issue with my boiler. Occasionally when demanding HW/CH the boiler will fail to fire up giving the following error lights: Lack of burner ignition (no ignition signal from the full sequence ignition device) (left and right lights...
  8. R

    Flourescent Lighting to a Plug

    I'm at work at the moment, I'll be able to post a picture of the wiring arrangements later tonight. I've bought some 3 core flex cable today, which is when I got worried about my earth as I wasn't sure what to do with the earth inside my flex haha :) Cheers.
  9. R

    Flourescent Lighting to a Plug

    Hi all, I'm wanting to wire some spare flourescent lighting squares to a plug, I'm no electrician, I'm barely a DIYer but I know how to wire a plug so I thought this would be right up my street. (The lights will be used in the mrs bespoke walk-in wardrobe). I did a bit of reading and...
Back
Top