Search results

Quick question for decorators what would be a good quote to wallpaper a prepared wall , it's 6.5 meters long with one chimney breast ,roughly 14 drops of paper ,

I had same problem when I was redecorating where a sideboard was the paper behind seemed all bubbly when stripped the plaster looked wet like yours just moved sideboard for a while and it dried up after a few days it's just trapped air behind something creating condensation , can see how it...

any one had any problems with touchscreen on 208 mine shows gps error even thou I don't have gps build in and it starts changing radio stations over and cutting off my Bluetooth . Going to Peugeot on Friday but they want £58 just for diagnostic even thou I took out the platinum extended warranty !

Any one replaced a egr valve on a Peugeot 207 1.6hdi before if so are they hard to do tools required etc

When I said if it's not in gear it revs up to redline I mean me doing it with putting foot on pedal not revving on its own, forgot to say few months ago when driving along a bypass instead of it driving smoothly it accelerated in bursts ,

There's no management light on or code anywhere . If it's not in gear it revs up to red line would this rule out turbo issues ?

on way to work today usuall 15 miles down motorway I noticed I didn't have the same power struggled to get up to 75mph foot to floor when usually it gets up to 85-90mph with ease. Also noticed the other day when starting car and just sitting with car not in gear the car almost bounces like its...

If battery was dead surely lights and radio wouldn't work the lights are bright would expect it to be dim ,

Two weeks ago car struggled to start and had a new battery fitted was working perfect , this morning tried to start car and it won't even crank over just a click sound, the lights radio etc work fine so assuming battery is ok Any thoughts ?

Was bought from screwfix so presume its a pucker part not dodgy knockoff !

This is the switch so earth goes to the switch then earthed to box via screws I presume

After fitting a new light switch I thought I would try my voltage detector pen around the switch only to find it picks up a current when I touch the actual switch is this because it's metal and just picking up the switch behind it or could it be something wrong ?

Hi im changing an old switch for a chrome new one the old switch had 2 red wires going to L1 and a cross symbol I think means coms? The new switch has L at the top and L1 L2 at the bottom where do the red wires go from old to new? I was thinking the L1 in old switch to L in new switch and the...

Going to start with getting stopcock replaced it looks past it's best so could be good start !

So today I just had seven Trent out to test water pressure to see if water hammer type noises is caused by it ! But only came back as 4.01 bar which they say is well within there limits ! Problem started off with small knocking when washing machine stopped started ie valve closing, but now it...

I was lifting a carpet in my upstairs landing today and noticed two wires running along side bannister one wire was a telephone/music speaker wire the other a 3core .75mm/1mm electrical wire as I pulled it to see where it went I realised it was only about 1 meter long then before I knew it I got...

Before I get an exspensive plumber out can anyone tell me if a faulty stopcock I.e gland packing or jumper in the stopcock can cause water hammer ? Lately it's been getting worse to the extent that when next door use water I now get it ?