Search results

  1. C

    block built shed water ingress

    Hi woody, so the block walls make up the 1st metre of 2 of the walls then using wall ties I built the other 2 walls from the base of the concrete pad, it is at this height where the issue is (although I have built another 1m on all 4 sides). I then preped and tanked the interior on all 4 sides...
  2. C

    block built shed water ingress

    Hi all I have a damp issue with my block built shed in a space at the bottom of my garden I have a block retaining wall 1m high. it is 1 block longways wide built on concrete footings with a purforated drain pipe in behind. I decided to build a block shed building of the retaining wall for 2...
  3. C

    my wood burner won't gravity feed!!!!!!

    p.s the cylinder is the height of the top of the burner
  4. C

    my wood burner won't gravity feed!!!!!!

    hello, thanks for all of your previous comments. I've rerouted the return to run down hill back to the boiler. it's a very slight gradient for the first meter, a couple inches in a couple of meters roughly. theres a very slight rise before the back of the boiler 2, inches. as I said before it...
  5. C

    my wood burner won't gravity feed!!!!!!

    hey sorry for the slow reply, didn't expect so much response. the system run's up hill from the cylinder and does seem to push water through when the boiler boils, heat leak get's hot at this point too. so if it runs down hill from the cylinder to the tank it should work? thanks for...
  6. C

    my wood burner won't gravity feed!!!!!!

    hello, I've installed a wood burner with a fitted back boiler into my bungalow. I have 28 mm pipe leading from the boiler going up hill for at least the first third of the run to the cylinder, which is a 28mm gravity tank It then runs steeply down into the coil out and back the same way to the...
Back
Top