Search results

Good point about the earth clamp, defiantly doing that. Maybe a Junction box like this [Link] ? Conny mentions above taking a 6mm cable into the Diall box in the garage from a termination box that the 10mm could go into first. I'm not sure if this was because the thought was that the 10mm...

Hi, Thanks for the link to screw fix termination box. Will i need this if the 10mm is already going into the box (pic enclosed) happy to do what is suggested if it requires this. Will i need additional RCD protection if i have the Wylex MCB in the house (fuse box) and also RCD built into the...

Thank you for your reply's. I was a bit worried that the cable would be too much for the job it was doing and would cause concern - but seems ok. As for the house fuse mentioned above [45 amp rcd] i have since learned this is called a "Wylex plug in push button MCB" and has a range of [15A-45A]...

Hi, I have already in place 10.0MM twin & earth to my outside garage. This is taken there by a conduit steel pipe. In the garage is a diall 13A 2 gang outdoor RCD socket. At the point the cable leaves the house its cut and the new cable is ready beside it to be connected by a junction box -...

Thanks Hugh Jaleak, good point about the weight of the cast pipe. Not sure whether to replace all the pipe with cast effect (£40 branch, 2 x 2,5m £60 = £100) or just the branch cast section (£??) Thanks again.

I have a quick question! I have a cast iron soil pipe (number 2 below) that I want to join a PVC 110mm pipe into (number 1 below). What I’m not sure of is; Do I have to get a cast iron branch junction or will PVC do if I support the cast pipe above and below with the proper brackets and use...