Search results

Many thanks you guys, I've got loads of idea's now, I just need a bit of a dry spell to get in the mood to tackle it :P chris76

That's it Nige! that's what I need but what's it called? I'll check it out further Thanks Chris76

I'm embarrassed to admit this, but I have just built a garden room covering the exterior with shuttering ply. I then applied, what I thought the rest of my house is covered in, an exterior type artex!! I stippled it and it looked pretty good, I even painted it, it matched the rest of the...

Great News,:lol: it's fixed, part arrived this morning and it's back to normal. I've no doubt it was the pesky mice that caused a short circuit on the board, but after all the advice, at least it's had a good service, so it should last OK. Thanks all, and Fido, I think you need to get out...

Mandate, just in the nick of time! You may have saved my machine from the fate of becoming a patio heater (shown in the picture above) Thanks for the info, I priced up the module on another site online and it was priced at £195!!!!! :shock: The site you suggested is £25 inc VAT and p&p...

Hi, Thanks Keith, good idea, but I've checked all the connections for dry joints already, Thanks Mandate, I think it must be the circuit board, I don't know how hard they are to find but I'll give it a try before I give up totally. I suppose I shouldn't complain, I worked out we've had...

Hi, it's me :cry: I've been through everything again and I managed to get a cold 'fill' on one programme, but still no spinning so I suspect it will now be the programmer or the circuit board that has a fault. Looks like I may have to call out the washing machine repair man! :evil...

Hi Mandate, I understand what you are saying and I can test the circuit this morning, but how does this affect the machine not spinning? Reading other problems, it seems to revolve around the 'pressure pipe and switch' the problem being if they are not functioning properly the machine...

Thanks Mandate, I'll swop the coils over so I may get a cold fill. But would this affect the failing to spin problem? I'll post the result here ++++++++++++++++++++++++++++++ No, sorry that didn't work, I swapped the wired from one coil to the other but still no action, either inlet or...

Hi, I've got exactly the same problem, a Service 'Caress 1000 A'. Filter was a bit blocked so I cleaned it out. Will not fill or spin. Water switched on, filter and pipes cleaned, Pressure switch appears to work if you suck and blow through it It runs through the programme and the drum...