Search results

Hi Greg, I did work out how to do it but I cannot remember what I did. Like all these things when you know it is so obvious but I couldn't find it documented anywhere and it took me a long while to work it out. if I remember I will let you know sorry I can't be more helpful.

Hi Greg, Sorry not to reply earlier but I have been away. No I did not get to the bottom of content type 6 not working. I have left the system set up with content type 5 only problem is it sends multiple text messages ie one for every circuit that is tripped.

Alarm response setup Silent 1st alarm- never Disable confirm - On entry Area A start at - Digi Area A stops at - confirm Areas B to D as area A but not used Fire starts and stops at - Digi not used Gas set as Fire not used HU starts at Digi stops at confirm not used Day alarm start at - sirens...

Thanks for all the help I now have a working system. Changed number as handymanjo suggested but still did not work. I added content 13 which sends an sms message when engineering menu is entered and exited, just to save the bother of triggering an alarm every time I wanted to generate an alarm...

Thanks for this handymanjo, I will try tomorrow as it is a little late to set the alarm off tonight.

Thanks for the prompt reply. Mobile No. 00447807471656. I simply set the system and generated an intruder alarm by opening the front door. Not sure how long it takes to register an sms message so left it 2min. before resetting. I have also tested the sim in my phone to ensure it is working OK...

Hi, Hoping someone will be able to help. I have tried Pyronix but they refuse to help. I have installed a Pyronix intruder alarm with a GSM module all is working well apart from the SMS messaging. Thinking the GSM module was at fault I sent it back to the company who supplied it. To their credit...

Hi, yes it is an Enforcer and I was defiantly in the engineering menu using default code 1111. Just had a quick look on the internet and your suggestion of a security sim is defiantly the way to go, more expensive but fulfil all my requirements. Thanks for you help.

Thanks for the prompt reply your information is most helpful. Regarding the tamper alarm putting the controller into engineering mode inhibits all the sender tamper alarms (PIR's and door contacts) but not the Controller itself. regards

Hi, hoping someone will be able to give me some advice. I have just installed a Pyronix Enforcer with a GSM Module, all working well with no problems but I have yet to install a SIM card. I intend to fit a pay as you go sim card. Is there any benefit fitting a particular card or will any network...