Search results

@Burnerman - you were correct! The inner track was still on the jockey shaft. It only came off when I took the nut off the end. @jj4091 - great find! I ordered both the part @jj4091 found and also this espares Jockey Wheel replacement. It turns out that they’re both the same size, just a...

Funny you mention that - I‘ve since had another look and actually found 3 ball bearings sat at the bottom, under the pulley.

Our Hotpoint dryer condenser decided to stop spinning last week, now we're back from holiday I'm tasked with trying to fix it. Model: Hotpoint SUTCD97B6PM(UK) Industrial Code: 95868089800 Opening up the side, I saw that the belt was partially shredded and had come off the white tension pulley...

Excellent, thanks again stem. For the 2x looping terminals, I'll use a couple of Wago connectors which I assume should be fine. I'll probably put the wires from terminals 5+6 and the TS2 in one also and just push them back in the wall for safe keeping. Been told they're hoping to dispatch my...

I've just heard back from the site manager. He asked the electrician and said that there's a live feed direct to the airing cupboard (which is next door to the Master Bedroom / Zone 2). Would this add up with the wiring in #3 (http://i.imgur.com/CJ6kcLx.jpg)? The TP5000 is about 1 meter away...

Yep - house was only completed last March and we were the 4th to move in on the estate! Sure will do. Really appreciate the assistance. Just hope it doesn't take too long to get the kit delivered!

Thanks again stem. I've gone ahead and ordered all the bits from Tado. I think what I'll do is ask the site manager if I can borrow one of the guys who install the system in the houses for 30 minutes to shed some light on how it's all wired up so I'm certain. Might be cheeky and ask if they...

Thanks for the reply stem. Just tested and the TP5000 can turn the radiators on even if the TS2 controlled ones aren't. I bumped the temperatures up and down respectively to test just now. For some reason, the response from Tado I received implied I would only need the two Thermostats...

I'm looking at getting Tado installed. We have a three story house with two zones: Zone 1: Ground Floor, First Floor. Zone 2: Second Floor. We currently have the following installed: #1 - Kitchen - Programmer - Zone 1 - Danfoss TP9000 #2 - Hallway - Thermostat - Zone 1 - Danfoss TS2 #3 -...