Search results

Evening, I'm just after some opinions please from the pros on here that install lots of showers, I'm currently in the process of installing an en suite and am looking at a choice of shower, the 2 choices are a concealed shower or a column shower, I've attached a couple of pictures to show the 2...

Because there is a hot tub in there it will 12v fairy lights fixed to the plywood so the moisture barrier would definitely be continuous, cheers m8

morning, I have built an outbuilding to house an acrylic shelled hot tub , the roof construction is a warm roof , on the inside I planned on using a moisture treated plywood straight onto the ceiling joists, is this correct or would I need a barrier between

Evening, I need a replacement bolt for my magnaclean professional 2 , i can order from Adey but I'm just curious if this is an item that a wholesaler would stock or os there something else that can be used with the same sized thread. Cheers

hi, just a wooden deck

Afternoon. I've been getting a drip from my mira combiflow shower, I've attached some pictures of what I have removed and I'm wondering if I'm missing a washer or what is the obvious part that is faulty? The cartridge is a spare one that I have never used however I have put that in and it still...

Morning. I'm just after some advice please on the following job. I'm looking to build a glorified shed to house my hot tub in. I have created the deck which is raised off the floor slightly and I plan to use some 25mm polystyrene floor insulation to help keep the cold out from rising through the...

Pic attached

Hi I'm looking to put some composite decking down and was wondering if any installers on here can recommmed any do/donts on what type/brand to use. The decking will be going down on a timber frame (pic attached)

I'm going to run 125mm ducting and then covert to 150mm flexi for the short piece down the wall, yes i will use a decent brand

Hi, I'm installing a cooker hood in an extension at my house and it needs mechanical extraction, am i ok to run solid 100mm ducting above the ceiling clipped to the joist and then core drill outside and put a vent on? Or does it need to be a bigger sized duct? The joists are 8"x 2". Thanks

The junction is buried under the ground so there is only 2 of the 3 openings to see, can i just blank off the unused end when that pipework is removed

K

Hi, I've attached a pic of my current set up, the vertical terracotta pipe is to be cut back and a black soil pipe to be ran straight up , just wondering what happens to the t connector when I lose the old soil pipe, can it just be blanked off?

Sorry here goes

Evening, I've attached a picture of what has been left following the groundworks, can I swap the t piece for a 90 degree bend as I don't need a vertical outlet going up the wall anymore? Or can i just blank that unused outlet off at low level and drill a 32mm hole into that t piece and connect...

Evening I'm just after some opinions on how you would lay this en suite out (see drawing) As it stands on the drawing now the basin and the wc are on a wall that is to be dot and dabbed, the wall to the right of the door is to be dot and dabbed and the rest are stud walls, would it be better to...

What are peoples thoughts on these leads, my workplace have just pulled them out of service stating that the maximum current a 2.5 flex will pull is 25amp, these leads are 25m in length.

Hi just an update, they won't joint inside , and they wont manoeuvre the cable to position I'd like, the cutout has to be on an external wall inside or outside so I will be having a recessed white box on an external wall somewhere with the smart meter and a metal clad isolator inside then a SWA...

My understanding was that A they won't manoeuvre the cable to make a loop in order to relocate the cutout and B they won't do a joint in the house, therefore the joint would need to be outside so that's where the suspended floor comes in as that would be my most direct route to get back to the...