Search results

Thanks for all your replies and advice. The old cold feed and vent pipes are only about 2 meters from where the new rads will go. I just have to work out what both are connected to on the first floor. Like I mentioned this is becoming a pain in the rear. I have the electrician complaining that...

Can I just use the cold feed for the new return and the Vent for the new supply?

No we were supposed to have this done by another company under a government scheme. He did a separate quote of just under 4k just for the boiler so would have been 7.5k for both jobs. The feed from the boiler goes to a tee piece that branches off up to the loft and I have a return from the loft...

I have noticed that when the header tanks were removed the plumber marked up two pipes as CF and V. Trying to work out if both the pipes coming from the heating header are both part of the feed side and work out what CF and V might mean.

Thanks @ivixor. Thought this might be the case. I might still use the existing 15mm but also run a short length of 22m up to the attic to run the other two rads off. What are peoples view on using speed fit. Have they improved enough to be reliable or is it just be to use copper.

3.5k This did include connecting a shower and tray, toilet, sink. Although the builder would have connected the sink and toilet. So these would just need to feed to them. There is also a mains feed right next to them to spur off. My builder told me he had just overpriced the work as he did not...

Hi All, I am looking to add three radiators in my converted attic. I am due to have a new combi oil boiler installed so this will be able to deal with the extra three rads. I have removed one rad from the landing and the new rads above are going to be fairly close by. Can I spur off the old...