Search results

Yes, completely! :)

That's the cause of the spalled bricks then.

Much cheaper electricity for me since we changed to smart meter.

Not really. The static pressure will be the same upstairs and downstairs, but the dynamic pressure will be lower upstairs as some of that pressure is being used to push the water flow up against gravity,

Battens and conventional rawl plugs into the brick would be my choice.

I wouldn't bother. That joist is more than up to the job, even with the notch and holes. Who put the noggins in to support the plasterboard joins? Where they there before or did you put them in? If they were there before, then that might explain the crack if there was a plasterboard joint...

Make sure you use screen wash with biocide in it from this point on. It’s a well known problem with bmws if you don’t use the oem screen wash.

Literally millions of shower enclosures are constructed of tiles on plasterboard and the vast majority are fine. Some will fail because they've been badly grouted, the silicone joint between the tiles and shower tray or bath fails and water gets in, or they get used excessively and water soaks...

I was thinking that if he has a smart meter, its probably got a live consumption reading. If its an old meter, you can watch the dial spinning.

Are you thinking the neighbours might be connected to his bungalow?

Smart meter or conventional meter? The scientific way to work out what you're using is to turn everything off for 1hr and make sure the meter doesn't move. The start turning on the lights and appliances you do use, one by one, and monitor by the meter how much power they consume. Immersion...

It won't be that sensitive to the exact length of hose. I'd trim it to a length similar to the original but slightly longer. With a longer length of hose, the amount of 'suck' as you call it won't change, but it will take slightly longer to create a vacuum in a longer length of hose as it has it...

If you steam off the paper, there is a good chance that the skim will blow off and that paper has been put up to hide cracks anyway. I'd be inclined to overboard what's there and then get it skimmed. If the coving and the ceiling rose aren't original to the house, you're not really losing...

I think you've answered your own question :) Where is that pipe through the wall coming from? Looks like a hot water cylinder relief vent which means its probably got a fault.

So far Burnham seems to have committed to: £300m on ending rough sleeping £800m ending VAT on electricity 0.4% of GDP increase in foreign aid, circa £6 billion. Where's all this money coming from?

Fraudsters are able to get hold of user name and password information from databases hacked from websites with the data sold on the dark web. As so many people use the same password over multiple sites, they'll then use bots to try that username/password combo in all sorts of places to see where...

I use the Lastpass app to manage my passwords and have given my wife the master password. The lastpass app suggests strong passwords and you don't have to remember them as its an addon for internet browsers to it autofills the passwords for you.

Yearly is way too much. Bi-annually is probably still too much, but manufacturers will always err on the safe side when there is money to be made :) My father in law just had to spend quite a bit of money on the brakes of his 1978 Rolls Royce silver shadow. He'd last changed the brake fluid in...

I should have been more specific and said that the ferrule stops the strands from spreading, rather than the copper.

It started in the 80's when flexible brake lines started to be made from fibre reinforced EPDM but i couldn't tell you exactly when they became standard fit. Its a bit like car exhausts. I couldn't tell you exactly when the started making them from a higher grade of steel that didn't corrode...