Search results

Sounds like a plan, Thanks for all your help

I took the showerhead off to get a flow reading & at the flow my wife normally has it the flow was about 6 litres a minute & it still cut out I then turned the flow up to 9 litres a minute still without the head on & the boiler ran at a constant 62c with the temp at the hose 44c

Ianmcd, I tried turning the dial down to 3/4 & the boiler cut out at 59c turned down to half way it cuts out at 54c I'm thinking of getting something like the attached pic to hopefully increase the flow rate.

Ianmcd, I tried as you suggested & the boiler read a constant 48c but as soon as I turned the bath hot tap off it went up again to 67c then the boiler cut out, I did replace the thermostatic cartridge as I had the old one out & the rear of it was damaged but no change at all, When I turn the...

I ran the shower which was going up to 52c then dropping to about 44c when the boiler cut off & I turned the handle the temp reading was at 60c.

I've just had my boiler's diverter valve changed & a new pump fitted after it died while the plumber did the repair to the diverter ? It's a Linea 28. Anyway the the boiler is running ok now, The hot water is staying constant at all the taps with the kitchen sink running at 11 litres a minute...