Search results

Yes it is on the bottom of stairs. When I put the LED fitting up I connected it as the previous pendant was connected and it flickered, came on sometimes, then others it would t come on at all. Swapped the red and black over and it was just the same. I have taken the LED fitting down for now...

Hi I took a light pendant down to fit an LED fitting. There are 2 Cables coming into the pendant. Below is how the pendant was wired. The Red out of cable 1 went to Blue and the Black out of cable 2 went to Brown. Now, from Cable 1 black was cut, and Cable 2 Red was cut. They had been cut at...

I thought a spur off socket 3 would be ok as then that would be the same as sockets 2 and 1. I don't want a spur as well as an additional socket. The way I described it to 'sureitsoff' would have been a spur as I thought to take the 2.5 from socket 1 into 3 and then sour off. But as...

I get you now. The way I described would be a spur. I will do it like you just mentioned. Much appreciated.

I take it you mean this loop from 1 to 3 And then a spur from socket 3 to a new single or double socket to enable all 3 appliances to be plugged in?

Yes number 2 socket has 2 cables (The feed from fuse box and then feeds number 1 socket) Number 1 socket - 1 cable fed from number 2. Number 3 - 1 cable fed from fuse box

All 3 of the sockets on the rough drawing are served by the same 32A. How do you mean by between 2 existing as they are other side of the garage. Hopefully the drawing show what I mean.

Much appreciated. Wasn't sure if that would be too much for the one socket. The washer only gets used twice a week during the day, and we are in the house at the time so can see how it is that way. If anything is untoward I will see about getting an extra socket in, the fuse board is only...

What doesn't sound bad? Extension lead or 2.5mm cable to create a new socket?

Someone did mention it would be ok to use the double socket for all 3, have an extension/double adaptor for the fridge/freezer and freezer and the washer in the other. Not too keen on this though, unless it is safe.

Can I use some 2.5 and extend to a new socket for the washer? Would this need to be fused? I didn't want to use an extension lead for any of the appliances. I'm ok with the connecting of the cables etc just not sure on if it is ok to just extend from this socket.

The socket where the appliances are just has the one cable going into it. This comes straight from the fuse board.

The fuse box is located in the garage which is integral to the house. This is where a fridge freezer, under counter freezer and washed are located. The garage power/sockets has its own fuse (32A) there are 2 double sockets on the opposite side of the garage and a double socket where these...

Evening We have conifers surrounding our garden but in between is a tree/shrub. The branches Off this tree all intertwine together and some grown on the conifer trunk and wrap round/,circle it. Attached is some pictures Thanks

Thanks for that. Anything we need to know when we get someone in to trim? Or is it straightforward enough for a tree guy?

Evening Would somebody be able to identify this tree from the pictures? It dropped some stuff? (buds/fluff?) a month or so ago then leaves appeared. If that helps?

Just checked, Yes definitely fed correctly. How would I tell if the supplies are balanced? I will fit one of the flow valves mentioned earlier. Hopefully that will work. Unless there is something I can do regarding the balancing? Thanks

Much appreciated, I will measure the rate tomorrow. How would I go about lowering the flow? Gate valve? PRV? I could fit something to test as easy access to the pipe work as it's a Bungalow and pipework in loft and access panel behind shower

Worcester Bosch Greenstar 28i. 2 bed Bungalow.