Search results

  1. S

    Electric shower puzzle.

    Hi, I am in France, but I guess amps are the same everywhere : when you touch the red wire, it hurts !!! I think water is getting inside the connection somewhere in the shower. This would explain why the trip is not regular. Try to see if a wire is damaged or if you have a faulty gasket or...
  2. S

    THANKS TO STAN

    No problem; Happy if I can help !!
  3. S

    hot water no heating

    Hi, when you say "motor", is it the circulating pump? Have you checked if the room thermostat (if fitted) is working properly? By setting a lower temperature, you should hear it "click". Try this first, and come back if not OK Good luck Stan
  4. S

    STAN, YOU STILL OUT THERE?

    Hi, glad I could help you on this :+)) For sure there are rules to calculate what a 1-liter leakage would cause, but you would need to know to volume of the system, the volume of the expansion tank, temperature, and so on. But now you know how to repressurize the system, take one bucket and...
  5. S

    low pressure indicator on potterton puma 80e

    Hi again, I am not specialist, but I don't think there is any resettable pressure switch. Usually, these switch are "compact" contacts (one membrane activates an open-close contact somewhere on the system). If it were an electric one, it would have been resetted when you tried it off-and-on...
  6. S

    Microbore

    Hi, have you checked if the thermostatic valve is fully open? If the setting is too low, or handle in wrong position, tap might be closed, and no air can go out ??... Good luck Stan
  7. S

    LOSS OF PRESSURE - ANXIOUS TIMES!

    Hi, first, repressurize the system. I guess you'll have to open both knobs as they are connecting sanitary water and central heating systems. Then check for any leakage (drains, rads, pipework, etc....). Even a tiny leak may cause pressure to fall down. If pressure is still going down...
  8. S

    low pressure indicator on potterton puma 80e

    Hi, you could try to reset your boiler by switching power "off" , then "on" again. May be you also have a "reset" function. It should be OK then. Stan
Back
Top