Search results

  1. D

    Navien Boiler

    Hi, thanks for your reply. To be honest, I dont know if those thermostats are present, but I will forward this information to the engineers that fitted the system to check that out. I've come to the (perhaps wrong) conclusion, that the boiler is either completely ignoring the schedule settings...
  2. D

    Navien Boiler

    Hello.. We have installed a new Navien Blue Flame oil boiler. We are using the Hive hub and controller to control and program the boiler. However, although we can trigger the boiler to turn on and off etc via the controller, it seems to be ignoring the schedule we have programmed into the Hive...
  3. D

    Boiler Flue gaps

    Hi there, My trianco Eurostar boiler flue has some slight gaps around it. I'm guessing these should be sealed? I have attached an image where you can see a slight gap around the flue 1-2 mm wide. I'm considering using fire cement to seal this gap? Thanks in advance
  4. D

    Trianco Eurostar 90 not starting

    Hi, Thanks for your replies. Transpires the flue has gone. Boiler runs fine when the air inlet hose disconnected. The flue is totally corroded looking inside.. Now looking for a replacement flue.
  5. D

    Trianco Eurostar Flue

    Hi, Does anyone know if the Eurostar 90 requires a flue specifically for that boiler, or if a generic flue of the same dimensions would suffice? Proving to be tricky to source a flue for this old boiler. So far have found this one... https://www.bhl.co.uk/trianco-1000mm-horizontal-flue.html#...
  6. D

    Trianco Eurostar 90 not starting

    Update: I bled it, some air then some oil spurted out and I immediately closed it when the oil was coming through. Now it is firing up and running, but making a strange noise, a bit like how the old computers sounded when you loaded a program :) Sounds like maybe still it stuck in the pump. I...
  7. D

    Trianco Eurostar 90 not starting

    Hi there, My mother has the Trianco Eurostar 90. It wasn't starting, so I took a look in the oil container and it had run out. Got the oil replenished, attempted to start boiler but still no luck. If some residue has blocked the boiler, would the oil filter catch that? If so, any ideas where...
Back
Top