Search results

Hay i just want to say a big thanks to you for all the help, my Electrics are all working fine, no clashes at all, no bangs, and no SMOKE, thanks for your time, it's very much appreciated.

Hi Mate thanks for that, here is how it's wired, and it's working, i'm going to try the boiler switch next, but have a feeling it will mess this one, just have to wait and see, unless you have an idea? thanks for the help, it's much appreciated.

Haha which ones, into what holes? i swapped the wires around in this switch until i got the light to switch on and off, but then my kettle would only work which is the socket opposite next to the cooker switch, unless i switched this switch on that works the Tumble Dryer, so i really don't know...

Hi thanks for the reply, the black wires are to light the Led light up in the switch, the brand is Schneider Switches from Screwfix, i had to buy these as it was the only ones that they had that were rounded and matched the back boxes, i took the other wires out the L2 to get the shot of all...

Haha it may help when i am able to take that in my brain slowly, so will the incoming supply be the live that is looped from the CU be the in? and the rest will be out ? thanks

Ok, sorry for the delay, i had some chors to do, here are some pictures before and after i done the re wiring, i hope it helps and i haven't made it too difficult to understand, would it matter if i have another loop cable that runs a fan is not connected ?? thanks

Hi, i think maybe you're right, so, is there a way i can the switches with the light on work properly? or just disconnect them? everything works now, it's just the lights staying on on the switches. thanks

Hi winston1, thanks for the reply, what i have tried to do, is replace the existing, back boxes and switches for newer ones, the only switches i could get to suit the back boxes(rounded) was these switches, so all i have done is just reconnect it all back up how it was, or so i thought, now the...

Hi, i fitted new sockets, and took pictures of the sockets before i did it, just so i had a reference when putting them back together, i bought two switches from Screwfix with built in lights, but when i wired them the same as what they were, on both sockets, they lights stayed on, anyway i...

Does anybody know what this is called please? thanks

It Only leaked when i pulled both flushes at the same time, before that is flushed away with no problems, i have removed this Air Vent off the stack and the suction has gone, so would imagine that pulling both flushes now at the same time will be ok.

Couldn't of done it without you Andy, thanks really appreciate it...

O Ok Andy thanks for that really appreciate your time on a Sunday to help out, best regards

Hi Andy took it off and when i did water come out the bottom of it, and it quite far up from where the water drops and the suction has completely gone from the blocker on the pan outlet and you can hear the gluging of the water going away and a slerp from the plug hole in that bath when the...

Yes it is fitted a brand new one, i'll take it off now and see what happens, thanks for the help Andy..

I took the toilet out, but blocked the hole, i filled the bath so high it made alike a slurping noise when i let the water out, as it was draining i pulled the blocker out and in it had suction there, the noise did get worse once i pulled out the blocker..

If i just fit this toilet back it whats the worse that can happen?? thanks

His wife said that their toilet is always getting blocked because of what the kids put down there, could that be it ?? thanks

Hi Andy, i just spoke to my next door neighbour, she said that the drains are in a neighbours house next to her, so just went around there and they are, i pulled my flush with tissue paper in it ans by the time i ran around there, he said that they flowed through that drain, and he herd a...