Search results

Eufy doorbell no subscription

Any brand will work; recommend pyronix delta bell easy to connect

Change engineer code- Enter engineer code, press no until it says change codes press yes on that Then yes again Followed by no until it says change engineer code press yes Press C to clear existing Enter new code followed by yes Press no until it shows CHANGE CODES again. press A to save and exit

Change master code - press D , enter your master code press no until it asks to change codes or edit users. Press yes on that then no until it says change master code. Press the C button to clear existing and then type New code followed by the yes button. Press no until it says change codes/edit...

As Sparky said, wrong IP range possibly gateway set for old router IP on a different range. Enable dhcp then disable.

Post picture of the main panel inside the house

Correct, that is the fuse carrier for the panel

Engineer code > zone number ( I.e 02) > yes/enter > 00 Not used > enter > back to installer mode > 99 enter escape installer mode

Remove zone wiring and power to the sensor from aux 12v and 0v. Enter installer mode and disable zone in programming.

Level set - If ‘Yes’, the system becomes ‘level set’ (having one area set only at any one time). If ‘No’: The system becomes an ‘area’ system (fully independent areas).

private messaged

I’d guess your top 3 cores then the lone 12v + and -. Best bet would be to trace the O/P cores I labelled as bell that will lead you to the others for certain.

Bell will only sound for 15-20mins if the battery inside it is still healthy once the power to it is removed

Ignore the bell. Remove the zone cabling to the pirs you wish to re-route Remove the 12v 0v feed for them Re-route and put back as they were Exit engineers mode

TP Link power line adaptor

The end user would receive an instructed handover from the installer on the use of the system and application chosen it’s not a one app fits all so manufacturers can’t provide you with that

Private messaged you

YeeHawwwww!

Hikvision website has all user manuals pdf and firmwares if required https://www.hikvision.com/uk/products/