Search results

Thanks guys that makes sense now. Boiler came on around 5 am by itself, Then just stopped working by itself 6 hours later. Thanks for the help will start to work my way through it slowly. Many Thanks

The thermostat batteries were new two to three weeks ago when this started. Will pop some new ones in again. Will have a look at how the wires are wired up to see how easy it would be to bypass BR1 seems simple https://www.free-instruction-manuals.com/pdf/p4766387.pdf Will need to see how it...

The boiler does not have a time clock. There are time settings on the Thermostat but that then goes back to either the thermostat or BR1 receiver is failing. Thermostat is sending the signal so feel it is the receiver. Cant see a way to get a manual CH on with the boiler. Will be ordering EPH...

Service Mode did get some heat into the radiator. But nothing changed when I reset the boiler it just went back to as before No radiator sign on the boiler to show it is firing the central heating

I cant see a way to bypass the BR1. Or perhaps I should say that I dont think my DIY level is up to that. I do suspect it may be faulty and am looking at replacing it with a EPH CP4 EPH CP4 on Amazon I did discuss this with the heating guy that services the boiler, He suggested it could be...

Does the SET button on the BR1 turn the central heating on manually regardless of thermostat?

What happens if you move the room stat closer to the receiver? I have the reset procedure for the BR1 next to the BR1. I have reset it and used the test button on the back of the thermostat and it all seemed good (as in what the instructions said would happen did). However the reset left the...

What happens if you move the room stat closer to the receiver? Nothing changes If you turn the thermostat temperature down so Room temp is 15 degrees and set the temperature required to 10 degrees you see the porange light go off If you turn the temperature required above room temp then the...

is the boiler display showing the rad symbol when heating requested ? No, Additionally when you turn the hot water you can here and see the boiler fire up. When you ask for CH there is no change. You do see the orange light on the BR1 ( this shows the request for CH to come on) I feel like...

Cant see a pump or valve external to the boiler. I think being a combi boiler it has not got one of those three way valves that used to stick on previous systems I have had with hot water tanks.

Valiant EcoTec plus 831 boiler (located upstairs). Boss Therm BPS242RF thermostat (located downstairs) Receiver for the thermostat is a BR1 (Think it is Siemens) The thermostat is either set to Night time or Day time, never the timer. The thermostat is showing a low temperature in the hall and...

Well I looked at the quote. Now I am looking at £1600 ish. Now all of the upstairs wiring seems easy to get to as you can get to it easily above the lights by going in to the loft. The walls in all upstairs rooms are to be redecorated so I dont mind ripping the wall paper off. In fact downstairs...

Project: Move bathroom upstairs in to the corner of a bedroom. Wall off new bathroom. Convert downstairs bathroom to dining room. Issues: How on earth do you get a good builder to do this as we have not had a good response so far. One gave quotes for bits he wanted to do and was not...