Search results

Hi, i believe the hole will take a 6mm Rawlbolt, how do you work out the type of bolt to use with the stud? Is it simply m6 bolt but longer??

I need to fit a wood storage rack in the garage on a brick wall. The instructions are rubbish and the manufacturer is unwilling to suggest the correct bolts to use. The shelf bars are 25mm in depth and the holes looks about 6mm in size. The bolt need to support 50-75kgs.. however I’m not sure...

https://energylightbulbs.co.uk/outdoor-lighting/garden-spike-lights/12v-spikes/outdoor-garden-black-stainless-steel-12v-mr16-low-voltage-spike-light-zlc328b I’ve attached a url link to the lights. I was looking at 12v as wanted to avoid armoured cabling issue that would come from running cable...

Hi Sunray, the image below is what has been installed. To confirm all light come on with switch, PIR are not keeping the lights on or turning all lights on, just the zone for the light required.

I’m looking to installing 12 outside LED lights along a path, these will be spiked in the ground, I preferred to use (low voltage) as small children running around. I’m trying to calculate the driver required to power these, if the max 35 blub watts is used. Wattage Max 35W Bulb Base...

Just to say I purchased the screwfix option suggested by Sunray, wired as EFLImpudence diagram. Happy to confirm working exactly as described. Thank you all that contributed to the thread, really appreciate the support.

Thanks, I looked at that Screwfix relay, it says the size of the suitable cable is a minimum of 6mm. I could do with one that works with 1.5mm - 2.5mm

Thanks for diagram. Unfortunately that relay is a nightmare to get. Its only in Germany and shipping is twice or three times the price of the item.

I believe it is, just trying to understand wiring, for the relay shown. Thanks

Thanks for diagram, so A1 live A2 neutral… is B1 not used? Are you able to draw on this photo easy for me to understand? Thank you

Ok thanks, I’ll stick with your one https://www.eibabo.uk/schalk/switching-relay-ac-253...207v-10a-pulse-switch-rds-u1-eb15710284?fs=1376075477 any advice on wiring diagram welcome. thanks

Thank you, are you able to provide a wire diagram for the one that you have suggested? I also found the below, the 26.2 has two poles. https://docs.rs-online.com/5c2a/0900766b816d4f15.pdf

Ok thank you both, are you able to provide a url link to a suitable relay? Thanks.

Thank you

Thank you, so this one would be suitable: https://www.eibabo.uk/finder/installation-relay-230vac-switching-relay-for-sockets-13.31.8.230.4300-eb15709196?

Any advice on which relay would be suitable?

Hi, thanks for your advice, unfortunately the switch is installed in the wall with cable (t&e) running to the loft where the wiring circuit is. Was hoping there was a way of just preventing the flow back to the switch terminal block from the sensors.

Hi I have two sets of flood lights that are controlled by two independent sensors. There is also an internal light switch that is used to turn on all the lights if needed. The light switch connects to both lives of the sensor terminal blocks. The issue is when one flood light sensor comes on...

Any thoughts on wiring required.

The hall switch turns on the light controlled by yellow(right) dimmer, that dimmer can also switch that light also, two way switch. I’d like the hall switch to be able to switch the black dimmer which controlling another light both on and off also. But also allowing both the dimmer switches to...