Search results

That’s the one perfect thanks for clarifying and thanks for all your help on this appreciate it

Oh is that the fused boiler switch in the kitchen powering the combi boiler. The valves are in the wiring cupboard where the hive receiver will be installed.

Perfect thanks, when you say 3amp fuse rating that’s the cable you are referring to right?

Perfect, so in terms of the hive side I connect the perm live to the hive live, would I need a link cable from the hive live to hive 1? And the separate blue cables connected to the brown valve will come out and a new wiring from hive connection goes in there? Obviously the neutral from the...

I have just checked it with a multi meter So the brown wires connecting to the orange wires I am getting 230v there when the boiler is off and 0v on the blank wire connecting to the grey wires from the port. However once I stick the room thermostat up when the boiler kicks in I am getting...

I will get it checked with a multi meter later, is there possibility the perm live could be with brown wires too? Going into the orange wires on the vale? I was just checking if that is also an option

I do apologise for any confusion, it’s a screwdriver tester I used. I believe the permanent live is going into the grey wires of the vale here

Put together a visual diagram to sense check my understanding

I also drawn up a quick visual diagram of the situation if it helps

Hello CWB thanks for taking your time to reply. So is my understanding correcting where 2 of the brown wires on far left linking to orange wire comes off completely as they are the room thermostat wires In terms of permanent live are they used in either the orange or the grey? The reason I...

Hello I posted a couple weeks ago and didn’t get any replies just posting again I am seeking a bit of advice on installing hive multi zone with two receivers on an ideal logic 35 combi boiler with 2 zone valves located in the airing cupboard. Just wanted to make sure where the correct wiring...

Adding more pics

Hi there I am seeking a bit of advice on installing hive multi zone with two receivers on an ideal logic 35 combi boiler with 2 zone valves located in the airing cupboard. Just wanted to make sure where the correct wiring goes. Currently have two Honeywell 707 thermostats upstairs and...