Search results

I was going to treat with oil or wax, would this protect the sapwood enough?

Thanks for all the replies....as you all thought with further sanding the marks have come out. regarding the sapwood i asked for some to be left on as i liked the contrast beside the rest of the wood. Hope it ll be ok ! I ve been told its been seasoned for 5 years.

Hello everyone. I recently bought some rough sawn oak planks to make a tabletop out of,having given them an initial sanding 3 of the planks are fine but the third has got 2 dark marks across the width of it on both sides....please see attached photos. i m not an experienced timber buyer so...

Hi Rocks. Thanks for the advice, works fine now. I had to take the cover off then as you said reset one of the stats with a pin and hey presto. Thanks. Tim.

Hi all. We ve got a creda condensor drier. About a month ago the heat stopped working.Having studied the book I ended up cleaning the condensor (which I d never done in 2years) and it started working, all was fine. Anyway it now appears to have done the same,everything works except there is nt...

Well having tried everything I finally bit the bullet this morning and called out Dynorod. A friendly fellow came out and investigated everything drains, soil stack, waste pipes, traps etc,and could nt find anything wrong.Thankfully they did nt charge anything. Anyway later in the afternoon my...

Hi. Pretty certain its not the fridge. Thanks for the suggestion.

There is nt a manhole where we join the main,form this soil pipe to the main its only about a yard or two.

Yeah.The first one downstream is about 30yards away, upstream its about 15 yards.

I dont have any access beyond this inspection hole. After this it disappears below ground into the sewer.

Seco. I dont think this inspection hole is big enough to get a proper bung through. It would be a case of an old rag which obviously would be no good.

Hi Tony. Ive been having a good sniff around but can t find anything out of the ordinary. Thanks.

Yeah its a screw cap then theres an insert that slides out, the end of which is rounded so as not to impede the stack. There seems to be a good seal on it.

plastic.

No cracks and no seals have been disturbed although there is a joint at the level of the door so maybe I ll put some silicon round so I can rule it out. I m at a loss to know what to try next.