Search results

Could someone advise please? Our Heating system is open vented with an indirect hot water cylinder. The boiler is a Glow Worm Ultracom 30 HXi and the pump is a Grundfoss UPS 15/50. The radiator pipework is 10mm microbore and there are TRV's all but one radiator. Currently there is a 15mm...

Tried a search but didn't get anywhere. I have made kitchen unit where the front is at an angle to the other units so I need hinges that will close past the usual 90 degrees - maybe 20 or 30 degrees more. Any ideas. Google wasn't much help... Thanks :)

Hi Chaps, Have a look at these pics with the time stamped on them taken morning and eve of the same day whilst we were out at work and nothing in the house that uses water was on. As you can see the 0.0001 needle has moved a by what looks like 0.0004. How much water does that...

I have done a few searches on here and just want to confirm what I plan is correct before going ahead. I need to paint some nicotine stained artex ceilings. I don't believe they have been painted before but need to confirm this. For a previously unpainted ceiling I plan on using a thinned...

Hi, I fitted a new hw tank before chrismas along with new 3 way motorised valve, tank stat and timer control box. There is a stat on the hw tank but no room stat. All has been working fine until recently. The heating and hot water are set to come on in the morning but when the water...

Hi all, I need to move my gas cooker out the way to tile the floor in the kitchen. I have taken a picture of the connector fitting which you can see below. There appears to be no valve other than the one by the gas meter. My questions are... is this a fitting that is designed to be...

I have just replaced the motorized valve, hot water cylinder, and programmer on our CH/HW system at home. Have refilled the system and have hot water and heating - so far so good. Before I use inhibitor I want to use Fernox heavy duty resorer to clean the system out as it is fairly old and the...

Hi All, Does anyone know if there is a direct replcaement for a Switch Master Midi Valve Actuator VA1?? Ours hasn't worked since we moved in and I have to thrun the valve by hand!! I have seen other 3 way valves but the motor box is in the wrong plane and would require the system to be...