Search results

Am I missing something here? :? Is there more to it than stripping back the insulation, matching up the colours & tightening the screws? :oops: B B

Flippin heck, guys! Your quick! :shock: Thanks for the replies. Nice reminder about earthing the box. :wink: B B

Thank's again WYL. Sorry to be a PITA BUT...... I'm not sure how to relate the level of cupping to ply thickness. Obviously the worse it is the thicker the ply required. How do i determine whether I have a high or low level of cupping. :? B B

Hi. I need to relocate an existing socket which is on a spur. For the sake of ease and neatness I would like to extend the existing T&E cable using 30A terminal strip. The strip will be within the 'old' double socket box capped off with a blanking plate the new piece of T&E routed via a...

Thanks for the replies gents. I haven't decided on the type of board yet but will bear in mind the width. Thanks for the tip. The existing floor appears to be really flat although on close inspection some of the boards do feel to have some curvature across their width. Is that what is...

Hello. I'd like to float a solid wood t&g floor over existing floorboards, preferably using a sticky topped underlay such as Elastilon. Is it mandatory that the new boards are laid at 90 degrees to the existing boards? The room is long in relation to it's width (7m x 3.3m) and has a...

Hi John. :) With regard to the chimney it's approx 25 feet. (Dorma Bungalow) I guess your hinting at ducting to an outside wall from the current position? That isn't really practical due to the positioning of doors & windows, as you have alluded too. If an outside wall flue exit is...

Hi Folks. My mums floor standing gas boiler is on it's last legs and desperately needs replacing. It's located against an inside, kitchen, wall and vents via it's own personal brick chimney. On the face of it the simplest solution would be to simply replace this 40 year old relic with a...

Hello I'm new here and guess what? I need help! :? There I was thinking I had the design of my proposed power shower installation well & truly sorted when I received the Warix flange, in the post. There, to my horror, printed on the package is a diagram specifying a minimum height difference...