Search results

Very nice job, you should be proud of yourself.

Very nice, love the attention to detail on the brickwork, wish I could lay bricks and build my own home. Well done

Hi, I have Worcester bosch 30cdi condenser boiler that is loosing pressure pretty quickly, I would say over 24 - 48 hours from 1.5 bar to 0. When topping up it takes around five minutes so we are talking a significant amount of water loss. I have checked all the piping apart from around 12 ft...

Hi, Yes it does have the "inteligent Controller" digital type. After having a look at the instructions it doesn't give much info as to hidden menu to increase the water temp electronically.

Yes, I will speak to the installer, but if he's missed some kind of temperature restrictor or something that could affect the boiler then he's likely to miss it again.

Hi, The guy worked over the weekend as a favour, I have had no hot water for three weeks as the old boiler completely packed in, he wasn't too pleased working part of the weekend as he missed his golf. Yes, he is corgi registered. But after speaking to him I don't think he fits worcester...

Hi, I have just had a new worcester bosch 35CDi combi boiler fitted to my semi-detached three bedrooom house. I have had the boiler fitted by a professional plumber who just finished the job over the weekend. On running the hot water tap I can only get medium / warm water regardless of...

OK, again thanks for the info. Does this mean copper compression fittings can be used though ??

Thanks for that fellas, is it because of the pressure of the gas being lower then ??

Simple question really, i'm having a new boiler fitted which requires 22mm gas pipe instead of the 15mm already fitted. Can you use speed fittings and flexi pipe couplings with gas pipes ?? Thanks in advance

I thought that might be the answer, remove the flooring and start again. To be honest I was hoping I could somehow gain access under the floor from another room (downstairs) and drill through the floor boards and sheet wood beneath the oak flooring then screw and pull the floor back down this...

I have a solid oak flooring fitted approx 2 years ago through my dining / living area. The floor was fitted by a joiner and an adequate gap was left around the perimeter of the floor. Now, the problem I have is the floor around an area of approx 3m x 3m as raised very slightly from the...

Yes it sounds like the fans running

Hi, I have tried this and it doesn't seem to make any difference, the indicators that are on the boiler are :- Overheat Boiler On Fan On Pilot On Burner On The Fan ON indicator is lit and the boiler on indicator is flashing. Thanks

I have a Baxi Solo 2PS boiler fitted, I have had no problems until now. The pilot is not lit and there are no ignition buttons to restart it, how do I relight the pilot & also what could cause this to happen. Thanks in advance

Hi, I have previously renewed my kitchen and gone back to bare brick, I also went down the route of dot & dab plasterboard. one thing I would like to mention, I screwed approx 250 x 15 thk timbers to the walls at the point were the wall untis would be fixed, this makes it a lot easier...

A mate does loft conversion regularly and he swears by wickes for the best price on the T&G flooring panels.

Whats the difference between a vented and un-vented hot water cylinder ???

A couple of questions for plumbers who may frequent this site. I currently have a conventional boiler fitted with a hot water cylinder and header tank (All fitted in the loft), I also have a pump which supplies my shower, this is a shower plus body and neck jets which can be used instead of...

Hi, I had the same problem, after adding extra screws on top of the already nailed floor boards I was still getting the odd squeek. Until an old boy told me to put a bit of talcom powder on the noisy joint, it worked fine for me, apparantly talcom powder is a very good lubricant. You can only...