Search results

got it working not quite sure how took head of pump and wired up to mains pump still working cleaned of some of the black rusty **** around grommet (was'nt much but took it off anyhow) put it back together filled up again bled rads(none needed it) the reset pressure to 1.4 fired her up and voila...

Keep getting 04 code on linea 24 drained pump from car tyre type nipple then repressurised exp. vessel (a tiny amount of water came out when i pressed valve,before i re filled,now just air comes out) to 12 psi but when i switch on it comes on for a second or two light green then turns red with...

so i leave leccy on and put selector knob on hot water setting then unscrew the silver screw on front how much do i unscrew small turn or all the way cheer's for help anyway

thanks for the help so it's more than likely the pump im a novice so could you please send me a more novice friendly version of checking my pump? is the screw you mentioned the silver one at front and if so do i take it right out and is electric supply cut of during this cheer's

i've got the led display working again so according to the manual an 04 error code is a broken pcb but i read on here a guy with the same problem it was his pump how can i tell which it is inition pcb or pump ?its not the selector switch thats working

yesterday i changed a themostat control on my radiator because the old one had a slow leak,which i thought was the problem causing my pressure to slowly drop.I took off the old rad valve and drained of the water,then fitted the new one,when i filled up the boiler again it made a hell of a noise...