Search results

I have had to remove a yorkshire fitting for some pipework mods. Do i have to remove all of the old solder from the copper pipe before fitting a new yorkshire fitting. Access is a bit tight and the solder does not come off easily with wire wool. Will the old solder on the pipe mix with the new...

Thanks for your advice it is much appreciated. The reason for just using the isolator as the on/off switch for the fan was down to the wife not wanting a pull cord in the ensuite room.The instructions do recommend a 3A FCU,but had already fitted a fan isolator switch,which after reading many...

I have read several posts on this subject,but have not found any that quite answer my question. I am in the process of installing an inline fan above my shower cubical,I have wired it from the lighting circuit via a 3 pole isolation switch, which I have situated outside the bathroom. I want...

It was purchased from screwfix, and just has inline shower fan kit on the box. The instruction does say a 3A fuse spur is to be fitted,but I thought I would ask as I have already fitted the a 3 pole isolator and I had noticed on a few posts that this is ok. If it is not ok can I just swap the...

I have read several posts on this subject,but have not found any that quite answer my question. I am in the process of installing an inline fan above my shower cubical,I have wired it from the lighting circuit via a 3 pole isolation switch, which I have situated outside the bathroom. I want...