Search results

thanks

I'm about to build a small wall around a patio myself. Is there a product like Tile spacers for Bricks???

Thank you for the detailed explanation, I will look into this...

thanks for all your comments.

Looks like I will have to test it with a meter, what should the voltage be to provide enough power to the TV eye??? The only thing I can think of is the voltage isn't high enough to power the TV eye, are there different types of TV eyes that need less power to make them work?? (I am just...

Yep - the Cable is fine no short circuits.

Sorry I haven't explain this very well, the bit of the bulb that connects to the socket (silver bit) has broken off from the actual bulb (glass casing). The socket that bulb goes into is fine, but the one keeps blowing.

Currently I have 4 TV outlets with 4 TV eyes, 3 TV eyes work fine. I will try removing others when I get home - thanks for the info..

In the entrance hall I have a 3x60w candle light, one bulb keeps blowing, I thought it might be cheap bulbs but the actual bulb seems to pop out of the connector. At the moment there is only 2 bulbs used, I don't want to risk the hot bulb popping out again. Any ideas what the problem might be???

The distribution box is masterplug which passes the infra red through all the outlets. The annoying thing is that all the cables were put in when the house was built so there is no chance of changing the cable without masses of work. Thanks

The TV is working correctly, I have tried it from another room, the wall plat is not isolated. The TV eye has power LED which is not on. I will try soldering the connector on. It must be something to do with the voltage not being passed all the way. If the cable is very long then the voltage...

O.K thanks, I will try this tonight..

There is no dc bypass. I have tried the other ports and I still get the picture but the tv eye still doesn't work, I have swapped the TV eye's around just to make sure it isn't faulty. I just can't understand how I get the perfect picture and the eye doesn't work.

Hi, Some advice please.. From my satellite digibox, I have connected the RF2 to a distribution box in the loft which then passes the signal to 4 rooms around the house. three rooms work fine with the satellite remote. But the kitchen TV eye doesn't work, the picture is perfect. The cable...

Hi, some advice please.... I currently have a 2 way CU in the Garage connected from the main CU in the House. The garage CU currently supplies 2 sockets from 1 Rcd and 2 lights plus 2 outside lights from the other. One of the sockets has a fridge freezer on all the time. I am going to...

Are you saying that 300mm is not deep enough even if it is covered with bricks it has to be 450mm??? What about if it was buried under paving slabs???

thanks for the info, one other point armoured cable, can it be run next to a fence if it is buried 300mm underground in steel conduit with a row of bricks buried on top finally covered with soil. Is this within the regulations???

Hi, I would just like some information/advice: I currently have a consumer unit in the garage 2way which currently has one rcd for sockets(2) and one rcd for lights(3). I am currently planning to add 2 lights to a patio which is about 12m from the garage(running armoured cable2.5mm buried)...