Search results

I called Ferroli and the answer to my specific question was, no, the flue length isnt that critical.

What no one? Any thoughts?

Hi All. I hope you can help. Ive been asked to helpwith finding out why a FErroli HE26 keeps reporting a flue error after about 1 hour of operation. Its a fairly new install and has always worked this way. It reports an A21 error every time the bolier is used for about an hour. Ive looked in...

Tony I can drop you a message on here to arrange, can you allow me to sent you one? Ian

Willing to pay Tony but finding someone is proving so difficult which is why I'm looking for an answer here.

Engineers in Watford that understand Gledhill equipment are as rare as hens teeth!

Interesting Tony but I assure you, the bottom element is linked to the E7 tariff and gives only 5 minutes of hot water before I have to turn the boost on. Could a dodgy rod stat turn it off?

Thanks Tony, Yes, the bottom element is on off peak for 8 hours. Its been working fine, but now only heats enough water for a quick shower Ian

no thoughts?

Hi All, I know the Gledhill Pulsacoil is not a much loved water heater, but I have an issue with mine which I need a little help with. In the morning, there is only about 5 minutes of hot water when I shower. I have to use the boost to get more. What would you suggest I change first. I am...

A further update for you. The solution that was working for me was using a freeview box lent to me by a friend. Having used this for a few months, I thought I'd better get round to sorting the two sky boxes. Either chuck 'em or fix'em. Thanks to the guides that Sam gangee recommended, I reset...

Sorry for any confusion Sam. Further update for you. I ordered a 4 way low noise LNB and satellite finder. Using the new Freeview box for powering the finder, I adjusted the dish to get good signal. Really easy to lose signal altogether. So, so sensitive. So, when I was sure I had a great...

An update which maybe will help others. Trying to isolate stuff, I took the LNB back to the shop today, just to check all was ok. They sort of dismissed it being faulty with a cursory check and mainly said, if you want us to come and look...... So, having eliminated that, I went back home and...

just buzzed out existing cable. All ok. its the ame cable just with 4 ft of cable either end cut out. Maybe I should replace it

no i havent, but, with te new lnb and existing cable I was able to get channels using a much newer box. so still mystified

I think I might have been a bit of a buffoon. Took both N connectors of the cable and tested for shorts. There are none. My ohm meter gets a reading between the conductor and the sheilding when I connect to the LNB which I am now assuming its the circuitry in the LNB, not a short. If I set the...

Yep, Thanks Daxi. I think this fault is very likely top be in the cable somewhere so will rip it out and start with new. I've put a non sky receiver on it today, one which shows signal strength and quality for every channel and I ws getting good signal and fluctuating quality, from zero to 40%...

Sorry, sat finder is what I meant. And yes, I dont have any channels right now. Once I get the aligned optimised, I'll try the LNB movement thanks

Hi All Quick update. To recap. Old box stopped receiving signal. Changed LNB. Still nothing. Different box received signal and channels with new LNB. Replaed old box, still nothing. tested able, showed a short, cut both ends and terminated again. Still nothing! Going to get a frequeny...

thanks for the replies guys. i took a known working unit up to the house and, at first it returned the same result. But, I set it to find channels, which it did. All worked beautifully, so, I got hold of a new box and,,,,,,, still no signal!!! Going to start isolating stuff, it could well be...