Search results

  1. B

    Leisure Cookmaster 101

    Hi, I have converted my cooker from NG to LPG and have fitted suitable fittings and gas orifices (jets). Everything working ok but have to adjust hob burner tap to obtain correct flame height. I have to access adjustment screw to do so. I have removed control knobs. Do I need to...
  2. B

    ADG7540 Dishwasher problem

    I selected 70 deg intensive cycle on my DW. After 15mins approx DW stops working. A continuos beeping and clicking noise is coming from the programmer. The program select button and start button stay on so I cannot count the number of flashes to identify problem. When I open the door and then...
  3. B

    ADG7540

    Thanks Zipper for reply. I am happy that pressure switch is operating correctly. I replaced same approx 18 months ago as it was faulty. I also examined same this time and it is switching ok when tested with a meter. I got the m/c to drain ok so the hose is not blocked, pump works! I...
  4. B

    ADG7540

    My dishwasher is showing error 4 flashing lights. This I understand from previous posts is a drainage problem. I cleaned filters and inspected pressure switch all ok. I emptied hot water into the m/c and ran same. The water drained away ok. I then selected a program and ran m/c. After...
  5. B

    hotpoint washing m/c aquarius WMF740 7Kg

    A big thank you. Followed your instructions. Turned out to be a jammed nylon stocking! I am back in the game. Thanks again. Merry Christmas
  6. B

    hotpoint washing m/c aquarius WMF740 7Kg

    have located twist filter. can only turn anti clockwise 1/2 turn!! is this normal, dont want to force it.
  7. B

    hotpoint washing m/c aquarius WMF740 7Kg

    apologies for the stupid question, where is filter located??
  8. B

    hotpoint washing m/c aquarius WMF740 7Kg

    Hi, My machine has recently developed a problem, fault F05 flashing on display towards the end of a cycle. Machine a year old. Any advice would be appreciated.
  9. B

    Whirlpool ADG 7540 Dishwasher

    Spot on zipper Having followed your instructions all sorted now. I removed the pressure switch and disconnected the connector plug on wiring loom from same. On inspection part of the connector plug appeared to be "melted" (may have been a loose connection). Pressure switch contacts were...
  10. B

    Whirlpool ADG 7540 Dishwasher

    Having read previous posts on this topic. (Start button flashes 4 times). Drainage problem. I selected 70 deg (intensive) setting and ran machine. I opened door at intevals to check operation. Machine ran and filled with water ok. Base of machine covered by water. Checked base after approx...
  11. B

    Whirlpool ADG 7540 Dishwasher

    thanks zipper
  12. B

    Whirlpool ADG 7540 Dishwasher

    If anyone has any info on above would be great. Recently washer is unable to complete full cycle. Beeping noise after approx 20mins. LED flashing 4 times. Washer 8 years old, first time this occurs.
  13. B

    Zanussi IZ 12 Washing Machine

    Hi, I have noticed that there is a grinding noise coming from the machine when is use! I have removed the panels and disconnected the belt from motor to back of drum. Noise is still there when I spin the drum. I noticed there were also one or two little fragments of metal under the machine when...
  14. B

    heat pumps

    Not an option, installer is no longer active. The only info I have is, Make: Multi Clima Machine: M P 00 4 MH Z S Single stage. Also found having searched web that multi clima, who are based in france are no longer in businness either. The pressure gauge on the collector side is at 0. When...
  15. B

    heat pumps

    First off, I am not quiet sure if I have the right forum here, but anyway if there is someone who has any ideas on the following that would be great. I have a climate master geothermal heat pump installed with a garden collector fitted. I am getting an error message E02 on the display, which is...
  16. B

    thermostatic power shower

    Pete sorry bout that, I am using a Unichrome NENE thermostatic bar mixer shower from Triton and I am happy with the installation. The temp. does get hotter after I increase the setting but goes cooler again quiet quickly. As you say I might not have enough h/w on tap. Stem, I have my...
  17. B

    thermostatic power shower

    Which valve??? The shower fittings i.e. pump, warix flange, piping, mixer are all new and shower has been installed a month. I am using the emersion in the hot water cylinder for the hot water. As a side note I have two domestic sized hot water cylinders piped in "series" in the hot press. Cold...
  18. B

    thermostatic power shower

    I have recently installed a power shower with a stuart turner pump ST55. In the shower itself I have a thermostatic mixer from which the shower head is connected. There are different settings on the mixer but I have mine set for 38 degrees. The problem that I am having is that the hot water is...
  19. B

    power shower pump connections

    thanks for yer advice lads. Have shower up and running and no leaks! First I tightened olive on to 3/4" copper pipe using an irish sized fitting. With olive squeezed up I then removed irish fitting and fitted 22mm flex hose which was supplied with pump. Happy days :P
  20. B

    airlock in hot water

    Let me try and explain, for the hot water inlet to the Stuart Turner ST55 I teed of an existing 3/4" hot water pipe in the hot press. I then fitted a lever valve after the tee and before the pump so that I can isolate the feed to the pump if the event that the pump may have to be replaced. Is...
Back
Top