Search results

Hi To all can i use pva to seal new plaster prior to painting using a mix of 5-1?

Hi All can anybody tell me if its ok to clean automatic air valve on worcester 27i green star boiler,or do i need gas plumber? Thanks in advance.

Hi all Can i use king span between ceiling and bedroom floors,and do i need to leave an air gap.

Hi opps thanks for your response the paint is oil based,and it will be almost two week by the time i get the next coat on. The finish is satin will i still need to use 240 grit?

the paint being used is dulux ultimate opaque satin

What is the longest i can leave top coat before applying the second coat thanks in advance

Hi Can anybody tell me how long i have to leave new brickwork before i can plaster please.

im off to work now so unable to respond till this evening

Hi Andrew i have checked all exposed pipe work in the house valves for leaks looked around the boiler no leaks checked the the plastic pipe outside again no water. i pressureised the expansion vessel to 1 1/4 bar, and bled all air fro the system ran for about 1/2 hour, and watched the...

Hi Andrew When i did my checks i checked the condensate pipe and there was nothing coming out. The only thing i have not checked is pipe work under the floor.

Hi Andrew if the heat exchanger has failed would there be water coming out in the boiler?

Hi to all I need some help. I got called to have a look at my daughters boiler because its losing pressure.I have checked the expansion vessel and there are no leaks.checked pipe work and no leaks.But it still losing pressure. Any help would be appreciated.The boiler is a worcester ri.

I want to use Dulux trade white gloss. so i will paint tomorrow and see what it look like.thank you for your response.

Hi Can anybody tell how long i have to leave zinsser cover stain before applying a topcoat.

Hi I am painting a previously painted fascia board that has a lot of dents in it,is there a filler that i can use on painted timber?

Thank you i will give it a try.

hi all i painted a fascia board about three weeks ago, but i want to give it another coat of gloss.Can i re coat straight on after sanding or do i need to undercoat again? Thank in advance.

Ok point taken .Just thought i might get some idea of how much i have been ripped off. i have a saying that i taught my kids .life is very simple its only other people that make it difficult. i think it has come home to roost on this occasion.

Hi from some of the posts that were made there were some of you that thought i was taking the p .Ok i had picked a rotten plumber and will learn from the mistake,bet i still think that for every rotten one there are hundreds of decent tradesmen.Thanks to all that made constructive posts.as a...

here are some more the brass thing is on the end of the 15mm pipe