Search results

A Candy CDI 1012 dishwasher. What ever programme I run runs at the end the Programme LED flashed really quickly and there is still water left in the botton of the appliance. Do reset (power off) hold down P1 power on - all LED's flash , P1 remains flashing . Whatever programme I try same...

I have a Villant SINE 18 combi boiler model VCW sine18 I have some history of the unit not firing backup after being drained. It seems to get air in the system so wont fire back up. Only way is the turn on the heating and open the screw on the pump to release air.Eventually all is fine...

It seems the radiator with the TRV never get really hot. All the other rad's on the system (all old and I am replacing ) are amazing hot ...ANy idea

Well, its working, tried some of the stuff from the thread....my system seemed to differ from what people were describing although symptoms exactly match.... Anyway, got a screw driver and turned the screw on the pump...seemed to have air coming out. So as I turned system on undid the screw...

It is a Vaillant vcw-sine 18 T3WFH Combined Heater Cat 1 Type C Hope this helps ...appreciate your feedback..

Ok, do you have any access to a diagram showing where that is ? When I get home will provide model number of boiler. Thanks

Have a Valiant combi boiler - have just drained the system. Changed a radiator for a new one add added a Thermostatic radiator. Have re-filled system to 1.5Bar. Gone to each radiator and opened valve until all air is released , then repeated increasing bar to 1.5 Bar on the system. On turing on...