Search results

  1. R

    UFH Advice Please

    Hi, many thanks for the reply. We have removed our (oil) CH and UFH will be a primary heating source throughout the house!
  2. R

    UFH Advice Please

    Hi We have just finished an extension with a screed floor (which we laid loose cable UFH. This joins to what was the existing kitchen floor which I had to raise by 12mm (using ply) to keep both floors the same level and have no threshold/trasition to lay Karndean LVT throughout. The big issue...
  3. R

    Kitchen temp wiring

    Hi and thanks for replying yes two seperate 20A dps (one per oven).
  4. R

    Kitchen temp wiring

    Thank you for the replies. Hob is on its own supply (32A) MCB
  5. R

    Kitchen temp wiring

    Hi We are in the process of having kitchen fitted. We are using the existing supply (that was for dw & wm) which is on its own 4mm radial with a 32A MCB for new multi oven (3.7kw) with a 20A double pole isolator. The plan is to have the combi oven (3.6kw) on its own supply however, for the...
  6. R

    New Single Story Extension - Dining Room/Lounge

    Hi Many thanks to all the comments, really all I was looking for is to run appropriate cables before I renovate the existing house as floorboards are available and loft has yet to be boarded? The cable run from the CU would be around 15m
  7. R

    New Single Story Extension - Dining Room/Lounge

    Hi Just wanted to start planning and get an idea of materials and setting out? I am looking to do most (if not all the) first fix and have spark connect and test. The existing wiring is on a RCD (10 yr old CU) and looks to have been split into a radial circuit. The new extension internally...
  8. R

    Replace 'Dial' Timer & Thermostat

    Hi Thanks again for the replies. Sorry I hand't mentioned there looks to be a Hager Relay for the HW pump & CH pump which is making it more confusing?!
  9. R

    Replace 'Dial' Timer & Thermostat

    Hi & many thanks for the reply. I will try and explain the current setup (& hope it makes sense!) There is a 3A fcu which has a dial timer connected (in room where boiler is located). In the hall there is an old thermostat with a dial (HWC in loft and is controlled seperately). I would like...
  10. R

    Replace 'Dial' Timer & Thermostat

    Hi Having just moved house (from having a gas combi boiler) to our new house (oil central heating/HW) I would like to replace the old dial thermostat and mechanical timer with a new wireless unit. My understanding is I swap the dial thermostat with the receiving unit? If so would I then just...
  11. R

    Would this be ok?

    Its a valid point, I just wanted to avoid having to chase a cable back to the switch/socket as it's plastered in...? :?
  12. R

    Would this be ok?

    Any advice on the below, please? :)
  13. R

    Would this be ok?

    Maybe like this...?
  14. Untitled

    Untitled

  15. R

    Would this be ok?

    Hi, It would be in the ceiling void and accessible. I thought a JB as I wouldnt need to chase the wiring back to the fused switch? Cheers again :)
  16. R

    Would this be ok?

    Thats a great idea, how about these? BEFORE AFTER? Thanks again!
  17. Untitled

    Untitled

  18. Untitled

    Untitled

  19. R

    Would this be ok?

    Hi everyone I have had to remove a 2 gang socket to make way for a new gas boiler. This was installed and connected to an existing fused 5A switch. (Before I remove the socket it was linked to the adjoining 5A fused switch and in turn 'powered' the 2 gang socket & 2 x 2 gang sockets upstairs)...
  20. R

    Bathroom

    Once again thank you for taking the time to help, its very much apprerciated! I was thinking of fixing MR plasterboard ontop of the Thermaline? My thinking was as its single block external wall this would aid the thermal property of the wall and not have 'cold' walls? Understood, I would...
Back
Top