Search results

This is the spaghetti junction box lol. There are 3 lots of hardwires in the middle coming in from under the box. Which ones would I need to change in order for the hive stat to take over. Many thanks.

Thanks for the quick reply ollski Not sure of the thermostat connection in the airing cupboard. I'll have look of that tonight after work.

Sorry to jump on the post. I've ordered the hive system and have taken a picture of the EP2002 control box. I'm presuming after reading the thread that it's a like for like swap with only the link needing removal. Thanks.

Considering that 550mm is taken up with the frame (working on width) then thatll leave 200mm for each window which would look rather silly. Never known a french door that small in width but im sure someone here will let you know. Id go for 1500mm ones.

I bought some of fleabay. Just type in "UPVC packers" in search bar. Theres one seller by the name of "ace-mirrors" who sends them world wide. Good luck.

your opening is 4 foot which is 1220mm metric size. Most 4 foot UPVC doors come in 1200mm width allowing you 10mm play either side of the brickwork. If i remember right BnQ's 4 foot doors were 1200mm wide and you have to allow 2100 in height including bottom sill (BnQ doors dont come with...

regular laminate is around 8mm and the underlay can be various thicknesses depending on what he ends up getting.

Measurements are done from the outside...brick to brick. Is it Timber or UPVC french doors your buying

depends on the units themselves....do they come with adjustable feet.

I take it your not getting any problems in the room above the conserv around the window in the photo i.e. damp or mould.

find the highest point on the floor and start your first brick to take the joists for the decking. Once all the bricks are level you can start laying your joists to take the deck boards. [/img]

A piccy would be good.

As John says the hinges have not been put back in the same place. Most probally the top hinge is packed out a bit more than the bottom hinge causing it to close on its own.

Looks like the government are easing off on planning permission for certain jobs, like no permission needed for conservatories any more and making it easier to move a door opening without full permission. Seems the 330,000 planning applications each year are bunging the system up so they...

it hasnt....its inside a strawberry jelly but seriously....B n Q should have em.

another way to beat having a large architrave

Ok it probally needs toe and heeling. Have you ever taken upvc glazing beading out before, because when dealing with large glass units its easy to damage them, if you have had no experience before.

What type of door is it...single panel....single glass panel...double panel. which corner is it dropping at.....the side with the hinges or the side with the handle on.

Thanks for the input guys The main F&R primarys are roughly 7 metres away. The conservatory is 3mtr x 3 mtr and the coil of pipe i wanted to install would be 15mtr long. Heres what i though i might have been able to do and no i dont have alot of underfloor heating knowledge but im sure...

Thanks alot lads for the input.