Search results

I have dug down 1100mm to reach compacted sandy gravel (bigish pebbles) and would like to do a strip foundation with trench block to come out of the ground.

Can anyone tell me what is the minimum thickness for concrete footings for a ground floor kitchen extension.

My design image view here //www.diynot.com/network/chicd4/albums/

Any opinions about the header or would the store act as a header?

My design

Is it possible to put the return from the circulating pump into the cold water inlet on a megaflow (bronze pump)

Thanks Shetland, sounds cheaper than a new test instrument.

My lighting circuits are on type b 6 amp mcb's on a 30ma rcd at the CU. Can't do an efli on those circuits as they trip. What do i put in the ELI column relating to those circuits. Can I just put a note in the remarks column that they are sensitive to the test.

Hip to gable is allowed under permitted development. I need to know the calculation of the additional volume so as to remain within 45 cubic metres as that is what I have left of the original 70 cubic meters.

Does anyone know how to calculate the volume for a hip to gable roof conversion. extending the ridge by 4.5m the height is 3.2m and front of eaves to the centre line (under the apex) is also 4.5m.

Yes you can buy lead lock connectors in different weight factors 7lb 9lb etc. and you don't have to remove the lead but it may be better to..particularly the water supply.

Not LPG. Definitely NG. Was the first thing that came into mind when I saw the reading. Newish up market housing estate in Braintree

Semi submerged gas meter supplying @ 50mbars. Let by tightness test all good but when I checked the inlet pressure at the appliance (Worcester Bosch 40 CDi conventional) I got 33mbar. Any thoughts? Ps there is a gas fire also which I haven't checked yet!!

Thanks but I'm sure it's the 70RS. The client somehow still had the original receipt.

thanks I will try ideal.

Thanks, but I tried that. It looks like it has been defaced at some time in its 15 years

Been asked to service one next week but the client does not have the manual. I needed to check the burner pressure gas rate etc.so the figures would be helpful.

Tried GOOGLE but no luck has anyone any other suggestions, please.

I need a service/installation manual for an Ideal mexico 2. Can anyone help? 70rs