Search results

Attached is a pic of the wall and where the metal fram is and where the TV will go ish. (Very crude) The green shows the rough size of the TV so you can see that the bracket will be no where near the metal work to fix to. If I cut between two holes in the loft to allow me to drop down a wood...

Both Yes that link shows it. Its like what your office would have. Its a new ish (2003) house. I have found some small holes in the metal frame in the loft for the cables for the light switches so am going to use this to get the power are coax down. On the other side of this wall is the...

Evening all I have a 32inch lcd that we want on the wall in the bedroom. The wall is only plaster with a metal frame. I dont think I will have any of the virtical frame behind the TV so cant use that to fix to. Any ideas of how and what is a good and safe way to do this? Many thanks Lee

Dan_Robinson Checked for voltage and yes there is 240V when it is ment to be running. The pump has a switch to select a speed. These are numbered 1 -3 and it is set on 2. When I switch this to other settings and back to 2 the pump seems to start. What are the settings for? also What is...

Dan_Robinson - the boiler is Ideal ICOS m3080 hope that helps Thanks Lee

The boiler is ideal, not sure on model will have to find that. The pump makes no sound when this happens. As mentioned this is only intermittent so makes me think the pump may be ok and its a fault else where. The over run was mentioned by someone at work. When it work correctley the ch or...

Evening all. I seem to have an intermittent problem with the pump on my heating. when the HW or CH is turned on the boiler will come on but the pump wont always start. So after a few seconds I get banging in the pipes as the water is boiled. Any ideas as to what the cause could be. I...

Got new parts today and now all working nicley. Thanks for all your help. Lee

Gas4you. I had the head off to see if the bit in there was turning when i switched from hw, ch and both. I have a bigger problem now. Got home and was going to check something else when I noticed that the actuator body was hot. the system has power but both hw and ch are off. I turned...

I had the head removed from the valve so I could see if it was moving :) Lee

Dave, Do you mean the leaver will move. If so it never moves. Just ran the system with the head of the valve to see what it does. The socket looks like a half moon with the flat side in the middle when power is off. Switch power on still same. Switch hw on and the flat side moves half way...

Thanks all for your answers. The boiler is Ideal, not sure the model but will find it. Whole system is only 4 years old. I have just removed the 3way valve head from th valve. The valve moves freely with no problems. I can move the leaver on the head and it moves ok. How do I know which...

Evening all Im hoping you can help me with the 2 problems i've got. 1, We have noticed that when the hot water is on only the rads are getting hot. Room stat can be set to 0. ch off on timer. this does not happen every time. Been pointed in the direction of the 3way valve. How do I test...