Search results

Yep, I think you're right! Thanks for looking Paul

Hi Tonto33 It's a Neff T1872N0/01 - does that help? Many thanks Paul

I have an intermittent problem with my Neff ceramic hob. Two of the four rings will turn themselves off for no apparent reason. Then they cannot be reset/turned on again, because the control seams to think they are still on. I'm not sure whether it is a problem with the control module or the...

Chaps - success. Based on your suggestion - but it seems in the 'non-live' twin cable the black wire was the spare rather than the red! So the final set-up, which works, is: 'live' red to ~ 'non live' red and 'live' black to L1 'non live' black to choc So I assume this is...

Yep - I think you're right. Many thanks to all for all your help.

Yes. I've managed (through various combinations - see previous posts) to have the second light permanently on (with the light switch just controlling the first light only) and, even at one point, the lights alternately turning on and off with the switch (ie Light 1 on / Light 2 off - click...

No luck, I'm afraid. Tried both reds in the ~ terminal. The 'live' red made the first light come on but not the second. The 'non-live' red made no lights come on. I didn't try any other combinations :-) Any other ideas gratefully received. Many thanks

Many thanks, chaps. I will try the suggested set-up tonight and let you know how it goes (and I promise not to repeat my trial and error system!). Cheers for now.

Fantastic qick response - thanks! Yes, the wires enter the box as two separate pairs (red & black each). I am sure there is only one permanent live. The original two switch set-up did have a 2" wire running between two terminals of the switch.

I had two lights running to a double dimmer switch and I now want to run both to a single dimmer. I would be grateful if someone could provide me with the correct wiring set-up. Some details: I have two (each black and red) cables running to the switch and the dimmer has three inputs (L1, L2...