Search results

  1. A

    Baxi bermuda 551 intermittent hissing from pilot light

    Hi I have a baxi bermuda 551 back boiler. When the boiler is not fired up, i.e heating and hot water off, I am experiencing an intermittent hissing noise which seems to be coming from the pilot light area. It lasts for about 10 seconds then goes of for about 5 secs then on again etc. Is this...
  2. A

    New home - Problem with Back boiler

    Hi I had this exact same problem at the weekend and it turned out to be a blockage in the pipes just above the pump. Worth looking into...
  3. A

    No heating or Hot water Baxi Bermuda 551

    Hi found out what the problem was, there was a blockage just above the pump that went all the way up to some sort of air seperating device. Had to cut pipes and flush them out and its all working fine now. Thanks for your help
  4. A

    No heating or Hot water Baxi Bermuda 551

    Like I said i really need some help!
  5. A

    No heating or Hot water Baxi Bermuda 551

    Hi I really need some help here. I recently had to move some rad pipes in my bathroom. I drained down my system (open vent gravity system with Baxi bermuda 551 back boiler) I refilled the system and bled the rads, reignited the pilot light and then switched on the heating. The boiler fired up...
  6. A

    Baxi Bermuda 551 not firing

    Thanks Dave any idea how i would clear ir?
  7. A

    Baxi Bermuda 551 not firing

    Hi guys just found out that the boiler works fine when the hot water is switched on on its own??
  8. A

    Baxi Bermuda 551 not firing

    Hi I recently has to move some rad pipes in my bathroom. I drained down my CH system (open vent gravity system with Baxi bermuda 551 back boiler. When it came to refilling the system I bled all the rads as it filled up and it seemed to be working fine. I also put some central heating cleaner in...
  9. A

    Shower pump positive or negative head.

    Nice one, Thanks very much for your help
  10. A

    Shower pump positive or negative head.

    Hi I am fitting a new thermostatic shower with a 2 bar shower pump. The pump will be on the airing cupboard floor about 2650mm below bottom of cold water tank. The shower head will be about 500mm below cold water tank. The pump will have dedicated supplies and a surrey flange fitted to the hot...
Back
Top