Search results

Makes sense, thanks for you're time...

Yeah pretty sure that would be possible, would it be best to try and take a live and neutral from the new light fitting and just discard the thermostat wiring altogether ?

Thanks for the comeback !!! The down lighters are mains fed and to me it does look as though the previous occupants have borrowed the neutral from the thermostat connection as this is the only wire from the set leading to the thermostat that still gives a response when tested with the switch...

Difficult to say exactly as most of the ground work for this is being done from the loft but it looks as though both of the original grey wires that were connected to the thermostat stretch round towards the old baxi unit and a single black wire was connected from the light switch in the hallway...

Have now traced the fault back to the disconnection of the unused thermostat and would like to know if it would be safe to reconnect the link between both of the black wires minus the thermostat with a standard plastic connector box ?

Worked a treat, thanks again !!!

Sounds like a simple solution will try - thanks again !!!

Sorry, makes sense - thanks...

Make sense, thanks...

Thanks looks like it may be an option I will contact Maplin's... Any idea what the other end of the connection should be connected to if anything ?

Does anyone know what the "small link" should look like for the Challenger AP 200 alarm system and where I can get one from ? The system is in place but I need to re-set the user settings back to factory settings and can't do this without the "small link" that attaches to the double pin...

One minute the down lighters were working and the next, nothing ? Have traced the wiring from the down lighters to the bedroom wall switch and from there to the wall switch in the hallway where I found not 2 but 3 cables containing black and red wires (assume that the 3rd set is acting as a...