Search results

I removed the handle/cartridge, slackened off the isolation valve under the basin and water started coming out of the cold outlet (where the cartridge screws into) Are you thinking that 'not enough' water is getting there? (TBH, I quickly closed the isolation valve when water started coming out...

It's main cold and combi hot - so not gravity fed (but I tried anyway and just got a load of spray!)

Hi all, The cold water was only dribbling out of the bathroom basin tap. I isolated the water and took the handles and spout off. I checked the cold cartridge, it visually looked fine but I swapped it with the hot one just in case, put everything back together but still the same issue...

Thanks, I've sent them an email (and will post any outcomes).

Thanks for your reply. Just bumping the thread in case anybody can help identify it...

Hi, my shower has developed a drip. Reading the forums seems to suggest a faulty cartridge (agreed ?). If so, can anybody identity the make of this mixer bar? Many thanks.

In case this helps anybody else...seemingly got there in the end. Had to reconfigure the zones and reprogramme everything (maybe more trial and error or more luck than judgement rather than anything else) but everything seems to be back to normal - no errors/alarms overnight and all the zones...

Thanks, sparkymarka. Really appreciate your constructive and insightful comments and knowledge of the situation. A bolted horse and stable doors spring to mind, but let's not digress...

Agreed...although, i thought i was asking questions before. Irrespective, i was hoping i had reprogrammed according to pages 26-29 of the manual but the panel isn't happy with me...not sure what i'm doing wrong...

With picture...

Hi handymanjo, see attached photo. White and green wires come from door contact (changed from blue/black from previous pic incase it was the black/blue wires playing silly buggers). Since I messed about with resetting the system, the issue has moved from the original 'tamper error' to now...

Hiya handymanjo, with a single piece of wire...

Hi sparkymarka, Assuming I've understood correctly...2 of the 6 core wires from the door contact go to zone 1 of the PCB and one of these wires is twisted with another wire from, what I assume is, zone 2 (the hall). I had the hump so I did a 'restore default command' (98tick at the keypad)...

This is winding me up now. Checked resistors across door contact, they were just about in spec. Went to RS components to get new ones. Replaced resistors and replaced the original 2 core wires with two that weren't originally being used. Same problem! I'm running out of ideas. I've linked out...

B**locks. Internal sounder just triggered with same 'tamper front door zone 1' error. Arrrragh. Could it just be a knackered PCB?

Hi Handymanjo, Many thanks for taking the time to reply...think you were right! Update: checked the internal battery (a good while after I'd disconnected the mains) and it read 13v. I linked out the tamper at the PCB and put everything back together- but no luck, I was still getting a 'door...

Hi, apologies for reviving an almost 10 year old thread but i was wondering what the solution to this problem was. Dodgy contact or dogy wiring? I have the same issue...moved into new property 3 months ago and all of a sudden (in the middle of the night!) the 9651 internal sounder went off...

Update: (assuming anybody cares or can remember the original issue/s)...it was capacitor C19 on the driver board! Thanks a lot everybody, especially ollski and St0rmer66.

Tony, your posts are slightly distracting. Now, I know you're a (self-proclaimed) 'expert/professional/boiler guru' and that you've, apparently, extensively worked on Worcester 350s in your time (if I'm not mistaken, I believe the last time was 'just before Christmas' - I assume Christmas...

Thanks , ollski - and I'll try taking a look at the instruction manual. What I'm slightly struggling to understand is, why the CH *seems* to work once the hot water (and hence, the boiler) has been running for a few minutes?!? (It surely can't be coincidence, and equally, can it really be...