Search results

Thank-you, deleting and learning the Siren worked. What are the advantages of having Wireless Bell Supervision set to ON as opposed to OFF? Is it needed?

Hi I had the same issue as this last night the wireless bell decided to throw a bender and start alarming at 4am. As a result I had to grab my ladder and just remove the batteries as I was half asleep. I subsequently set wireless bell supervision to Off for the future. Today I replaced the...

Thank you for this explanation. So Lovell's were correct in their statement to me. Fair enough. Will I be able to upgrade to Nest/Hive/etc easily?

Yes I understand that’s how it works right now, however the manual clearly states as a user, I can select modes of operation. Heating or hot water only or both. I am struggling to understand how this is customer fiddling with the system?

I think you could be correct, this is what the Vaillant tech support guy said to the Builders supposedly. Hmm ok

I thought as much, thanks guys really appreciate the prompt response. They use a contractor called Rolec who came over today and are convinced this is how it works. I was even told it’s a display from a combi-boiler which I quickly dismissed as I know that’s not the case. Could it simple be...

Sure I’ve tried to capture it all in one shot. The builder is Lovell’s.

Hi Guys So its a new build house (frowns lol) - moved in last year, just realised when I switch the boiler to hot-water mode only using mode on the boiler. You can see the valve moving upstairs but the boiler will not fire up. In both heating and hot-water mode, all works fine. The guys from...

Thanks for the suggestions and tips guys, will give this a go!

Hi So we have a new build under 2 years old now, unfortunately my father in law reversed into the corner and of course a small chunk of both sides and the render corner, have been damaged. Is this an easy fix with some render mix like this ->...

The Hall PIR is set as 08. Entry Route, so far been over 3 weeks and no issues... lets see how it goes! Thanks to all for help and support thus far.

the settle time has been left as default which is 5 seconds, I have actually set that to 10 secs now, should be enough right?

I checked this last night, looked ok, from the time the arming starts, i.e. Final Exit to the Hall PIR going off was 2 seconds. And also I this had happened when I also entered the property the previous day on entry with a delay of 30 secs (hall PIR set to 06. Entry Route of course) I will...

I could not see anything obvious in the log other that Hall PIR sensor has activated an alarm. Will keep an eye on it now and as Sparky suggests look at settle time and of course a potentially defective PIR.

Thanks Sparky I did think initially this seems like a the hall sensor playing up, what do you normally set the Settle time as? Thanks A

Oh wow, snap, ok so firstly Happy New year to all! Thus far its been ok, I have left the settle time to default but may increase this and see what happens...

hi guys after 5 months of no issues with my Pyronix enforcer, randomly the other day both on enter and then today on exit the PIR in the hall (set as Entry Route as I only have one area set as A) went off when I set alarm via the panel and open/closed the door (Final Door) Set up as follows...

Hi Just wanted to know what this 'Set Fail Warning' setting is referring to (as opposed to Set Fail Timer which is set at 40 secs default. In the manual it states "Time for which a set fail warning will be present." Yet it seems to be set at 0 secs as default, what does this option do...

Been away for a while, yes I did. Basically the manual is wrong, the format you need is as follows: smskeyword 1**** 11 00 to arm. (00 to disarm + 00 to receive a confirm SMS) eg. mike123 11234 11 00. you have to use area code as 1, even though the manual states you dont, and you have to keep...

Ok - don't see how that has anything relevant to this issue or thread to be honest? Back to the topic.... So had anyone got the SMS remote command working on this panel?