Search results

Hi, sounds simple enough, only 6 tiles! However, I'm tiling down to the basin and the back of the basin where the tiles will come down to is curved, so if I put the middle tile in the centre of the basin the tiles either side will not touch the basin at their outer edges (hope this makes...

Definitely no isolation switch for the fan, however, I figured why there's no power....it's been disconnected from the light, reconnected and I've got power (fan doesn't work which is presumably why it had been disconnected), should be fine when I fit the new one. Thanks for your help.

Can't see where the cable goes, it's in a downstairs toilet, only place it could be is in the ceiling, I'm buggered if I'm having the carpet and floorboards up upstairs to check , it'll have to stay not working!

Any suggestions where a 'fan isolator' is likely to be?

Old fan hasn't worked since I moved here. I only know it had a timer because I took the cover off and there's a bit to adjust the timing. May even be that the old fan works, I'll never know until I can find out why there's no power.

Just checked, no power to either the permanent or switched live! Great, never simple is it! Now got to find out why. Thanks for your help.

Thanks, I thought that was probably the solution, will double check which wire is which before doing anything, said presumably because from previous experience it's the most likely combination. Cheers.

Hi, first post so be gentle with me! I'm replacing an old extractor fan. The old fan had a timer built in, the new one doesn't (I just want it on when the light is on). There are 3 wires to the current fan, Blue (neutral presumably), Red (Live presumably), Yellow (Switched live presumably)...