Search results

  1. D

    Thank you. I will set keypad link to #1. Cant find a setting for the number of keypads so will...

    Thank you. I will set keypad link to #1. Cant find a setting for the number of keypads so will just have to try it. I will have to try to tell it there is not a telephone modem, then link the line monitor to 12v I dont know how much of that I can program as I only have the User Code. Is there...
    • DIYmark
    • Profile post comment
  2. D

    Hi Sparky, I have a Gardtec 800 and like some advice please. Mine was working when I moved in...

    Hi Sparky, I have a Gardtec 800 and like some advice please. Mine was working when I moved in but I relocated main unit, RKP and PIRs. I remember having to cut the siren lead to silence it. I now need to recommission it. Got a new battery, what is the procedure? Also had 2 control panels. Only...
  3. D

    Glowworm 100e problems

    Gasguru Can you help Hot water cycles very hot to very cold at intervals of about every 10 seconds Any ideas of how to fix or what I can test? Could it be another diaphram operating a switch like the one I replaced before? Heating still seems to work on its own ( although I can hear a...
  4. D

    Glowworm 100e problems

    Hi Gasguru You are right, of course, looked more carefully the heating does come on when not commanded But now got worse Hot water cycles very hot to very cold at intervals of about every 10 seconds Heating still seems to work on its own Diverter valve? or something that signals it...
  5. D

    Glowworm 100e problems

    Gasguru Thanks for reply Thought that sounded like a lot of gas Gas flow seems to be same whether or not DHW is at correct temperature No, heating comes on at correct time, was just commenting that the temp of the radiators always seems to be very hot and doesn't go luke warm like the DHW...
  6. D

    Glowworm 100e problems

    Gasguru, I read the meter and with the water running at the tap but not as hot as it should and be flow rate was 2580 cu m per hour. The radiators always seem to get very hot Thanks once again Regards Mark ( the heating pressure seems to have settled down now to a stead 1bar cold 1.5...
  7. D

    Glowworm 100e problems

    Gasguru, Prob 1 DHW gets only luke warm from any tap about half the time turning on and off sometimes cures it. Not sure, but don't think it ever gets to max temp when tap is turned on full. Flow seems to be a bit jerky. Prob 2 Not noticed pressure getting towards 3 Keep pumping it up to...
  8. D

    Glowworm 100e problems

    Hi Gas Guru Thanks for previous help Now got more problems replaced diaphram and cover as recommendeAll ok for a while Thanks again Now DHW doesn't always get very hot Seems to be loosing pressure - I keep topping it up - cant see a leak Any help very much apreciated as always Mark
  9. D

    Glowworm 100e problems

    Replaced the cover and diaphram and all is ok now Thanks Mark
  10. D

    Glowworm 100e problems

    Oh right Thanks again Mark Do I need the cover AND the diaphram? Thanks Mark
  11. D

    Glowworm 100e problems

    Thanks guys :D I had the same problem ie DHW staying on and sometimes over-heating Sometimes not coming on when demanded Just looked and the pin is sticking Will buy some WD40 tomorrow Or is there something better?
Back
Top