Search results

many thanks for the helpful advice. have to sayit seems that it is the edges that are the problem in the main (apart from a lumpy bit in the middle!) think i need to go back and see how i can take this forward. Just didnt want to seem as if i were being unreasonable thanks again

i recently had laminate installed by the builder (or rather the builders joiner) who did our extension. i found that certain areas went down approx 5mm (fibre board underlay over concrete) and so added it to the snag list. The problem is more extensive than i first though and it is really...

Thanks very much , i thought it was something to put right but didnt know if i were being unreasonable :roll: , now added to list :D

doh :oops: 5mm, that would have been picky otherwise wouldnt it :lol:

we have just come to the end of an extension and the "joiner" has fitted the laminate floor (fibre board underlay). However, when you stand on some areas (near the corners, skirting) there is an aprox 0.5mm gap between the laminate and skirting. I know there needs to be some room for expansion...

we do have a hot water cylinder connected, how many radiators does 23.2 sq.m equate to? many thanks :D

We have a baxi bermuda 552 back boiler with we *think* is about 13-14 years old. It currently runs 6 radiators. we are planning a new singel extension and will need to add radiators ? 3-4 (need to clarify that!). will the boiler accomodate this ? the product info states that radiator capacity...

sorry that this post is a bit of a waffle but here goes we had a rewire done when we moved into our house in 1995. the completion certificate states it complies with 16th edition (but doesnt actually specify the particulars of the installation!) had 2 double sockets fitted approx 2 years...