amp

Hey all I have what is probably a dumb question, but I have a 100v Line amplifier : Redback A4037 https://www.altronics.com.au/p/a4037-redback-phase5-40-watt-100v-public-address-amplifiers/ And I'm wondering if this can be safely hooked up to speakers that are not specifically 100v without...

Maybe I can pick the brains of some of you who actually understand electrical stuff - this is over my head and I am keen to identify the problem asap. I initially thought I'd identified a problem with my guitar amp. Last night, when plugged in and playing through the amp connected to the mains...

So a couple of months back I got a pair of Alto True Sonic TS210 PA speakers for outdoor events. However the wattage rating of them is strange to say the least. According to https://www.altoproaudio.com/downloads/Alto-Professional-TS210-Spec-Sheet.pdf, they have a continuous RMS power rating...

In brief: my house has an oven circuit with a 6mm cable and a 20 amp MCB. Both the electric hob (6.5 kW) and oven (2.8 kW) are on this circuit. Can I upgrade the MCB to stop it tripping? Background: We moved in to the house a couple of years ago. The built in oven was slow to heat up so I did a...

I recently bought a 12V Halogen light fixture that takes upto 5 20W G4 lamps. Inside this fixture is an electronic transformer that supplies 12V AC current to 35W-105W load. Looking for LED bulbs, I see most of the 12V AC LED G4s are 3-5W, which combined together wouldn't exceed the minimum 35W...

I tend to find that quite a few appliances that I buy that are wire in 0.75mm² flex often come with a 13A fuse fitted. How many appliances have you got that are wired in 0.75mm² flex that have a 13A fuse in them? I will post back later with my answer.